Scorecard

[Duxbury2002]

Hi all

Does the Scorecard self populate when you publish the course? When I play in unpublished all the tees don't show up, only the reds.

Thanks
Phil

[sirish19]

When you first import a course, it will only give you one tee (red) and one pin that are positioned where you put your tee and pin waypoints. You will likely need to move those around a little bit to get your yardages to align perfectly with the course scorecard. Put the middle waypoint at around 300 yards from the tee box if you can. Once you have done that, highlight the”red tees” and then select add tee box and move it to the next tee box position. Get all 4 or 5 tee boxes placed and then change the color of each of the tees. I find that it helps to press the right RS button twice to pull up the hole scorecard. This way you can get the hole yardages exact.

you will need to flatten all of the tee boxes, and potentially put down another surface using a brush to make it look nicer than what you splined, and also lay down a layer of heavy rough around the tee box if you find the ground starts splitting.

if your course has uniquely shaped tee boxes and you want to preserve that then spline out all tee boxes but if they are mostly square or other standard shapes, it will look nicer to just lay those down with brushes so I wouldn’t bother splinting them all out as they don’t usually come out looking as nice anyway.

hope this helps.

[Duxbury2002]

Thanks for your answer!