Uneekor overhead golf monitor

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • BGCurtis2nd
    commented on 's reply
    I have been working with a UV curable ink, just having a hard time finding a bulb that will cure it properly, also have been trying to check out some other products that may be usable.

  • SFR
    replied
    Originally posted by BGCurtis2nd View Post
    jrz Here is the ball pattern not hard to duplicate, hard part is getting a marker that will not rub off.
    A poor mans way would be to use that template and get a hole punch (for paper) that is about the right size of the Dot. Use the template to put a small mark on the ball where the dots go. You can punch some dots from black vinyl and manually put them on one at a time and replace as needed. I used a 1/8" punch to do some testing once and they worked but may have been a bit small. That size also fit into the dimple of the ball and I also did not use the exact placement as in the template which also may have made things read a bit off, however even that ball read close to the GC2 numbers for back spin.

    There is a member here that is a couple hours away that now has one and at some point will test out the smaller dot again with the right placement and see how things read. The reason the smaller dot was a better idea was that there was no way for the screen to rub on the vinyl dot as it was recessed. However direct contact with the club on the dot side would still compress the ball enough to tear off the dot. One can have a hitting side of the ball and just place it so that you strike in that area only. Short shots and putts would not matter.
    Last edited by SFR; 10-29-2019, 11:12 PM. Reason: more thoughts

    Leave a comment:


  • BGCurtis2nd
    replied
    jrz Here is the ball pattern not hard to duplicate, hard part is getting a marker that will not rub off.

    Leave a comment:


  • gene438
    commented on 's reply
    Welcome, glad to see you here.....

  • FistPump
    replied
    Hi all, I am new to the Golf Simulator Forum and I am impressed with the amount of knowledge and experience this community has. I have been reading posts and topics on the Uneekor QED for months and finally bought the system a few months ago. My buddy has a Skytrak and told me I should create an account here to further help people with their questions about the system. I had tested it out extensively now. I am running it on an i7-9750H CPU @ 2.6 GHz with a GeForce RTX 2060 graphics card. Overall I enjoy the system and watching my impact video. I find no issues with the hardware. Rarely do I get a no read. The response time is almost instant. Depending on your tee set up, there are 2 settings in the Z3CamTool. If you use BirdTees or regular tees "One Area Mode" must be set. If you have a permanent tee/auto tee, you make sure "One Area Mode" is OFF and set your tee position with the "red box." White drivers do not work all the time. So keep that in mind if you have white drivers. Look forward to adding to the pot of knowledge! -
    Attached Files

    Leave a comment:


  • Jwheels9876
    commented on 's reply
    Yeah that's a bit worrisome to me. Plus I wouldn't get all my bonus points on my Amazon card for spending 6k lol.

    Kind of a bummer.

  • LondonGolf
    commented on 's reply
    I don’t believe so. I had to wire the money. A bit scary, I’ll be honest...but all worked out just fine.

  • Jwheels9876
    replied
    Can you buy this machine with a credit card?

    Leave a comment:


  • LondonGolf
    replied
    Just wanted to give Uneekor QED a shout-out. Got my system about a week ago, and installing it was easy. The system works fantastic in terms of accuracy, and the 20 inclused courses are pretty sweet...might have to plan a trip to Korea to check some of them out lol. Doug was a great help with info during the buying process, and Austin has been a rock star with tech support/service. For anyone in Ontario Canada who is interested in this system, I recommend visiting InHome Golf in the GTA to check it out.

    -Jake

    Leave a comment:


  • keither5150
    commented on 's reply
    Not yet, I was going to wait until I get my unit. Looks like I will be receiving it next week.
    Last edited by keither5150; 05-30-2019, 01:31 PM.

  • Smudge7204
    replied
    keither5150 is there a thread to follow this new GSA product, also looks very promising?

    Leave a comment:


  • keither5150
    commented on 's reply
    Willie, I know a little about GSA. Check out their site. https://www.golf-simulators.com/ PM me with any questions. GSA has a new system coming out soon. I will be getting mine for Alpha testing the first week in June. Not sure which software would be best for a business. GSA can run JNPG, TGC, TGC 2019, E6, and even the old Red Chain.... which I don't like... too dated. Uneekor looks like a solid system. I have never hit on one but they look good. Probably the best Uneekor video is the one at the PGA show where a golf pro hits a straight shot, then a draw and then a fade. Followed by a big slice. Most GSA users will be upgrading to the new system once available. And it should be less money than their current systems.
    Last edited by keither5150; 05-28-2019, 12:28 PM.

  • Willie Vader
    commented on 's reply
    I really want different hitting zones, as in rough and sand. To me, always hitting off a "fairway" mat is not even close to real golf. Can the Uneekor work with a mat that has rough and sand textures that are on the market?

  • Willie Vader
    commented on 's reply
    From everyone I've chatted with, the expense in getting open is the key. Do you have an idea of how much it would be to make a Uneekor system into a money making bay? What all would I need to add to make it functional?

  • Willie Vader
    commented on 's reply
    Thank you immensely for your feedback. Do you have any knowledge of GSA? I like the graphics of GSA better and also I am wondering which is better for a business. Again, the ABSOLUTE best and most data is not necessarily the biggest selling point.
Working...