As a newbie on here there is a lot of overwhelming information on which lighting to use with the Protee sensor mat. After trying around 10 different combinations of halogens, that were available at my local hardware store (as recommended by other forum users) with many different configurations nothing seemed to work properly.
So, what ended up working the best? Simple answer, follow Protee's recommendations. I got everything from Amazon in 2 days. See the links below. You will need to take the bulbs and transformers out of the cans where you will put the Protee Bulbs into. If you need any help with that let me know, it's quite simple.
A huge shout out to Jamie PROTEE UK for his excellent customer service, and patience with me even though I didn't take their advice the first time.
I got to play around on it last night for the first time successfully and this Protee sensor mat is spot-on and accurately humbling.
https://www.amazon.com/gp/aw/d/B00LL...b_b_asin_title
https://www.amazon.com/gp/aw/d/B000G...b_b_asin_title
https://www.amazon.com/gp/aw/d/B0090...b_b_asin_title
Please note, you will want the lights to look like a figure 8 without overlapping. This pic shows a slight overlap which can create a shadow.
Also, very important, you want the light over the mat centered directly over the center of the mat (not the tee location) and pointing straight down.
When all else fails, or if you get stuck on anything, don't try to do it yourself...let me say that again..do NOT waste your time just to mess things up. Contact Jamie PROTEE UK or ProTee United Their customer support is off the charts and they are all enthusiastic, sincere, and helpful. Also, they have the most accurate knowledge out there on their amazing Protee sensor mats.
So, what ended up working the best? Simple answer, follow Protee's recommendations. I got everything from Amazon in 2 days. See the links below. You will need to take the bulbs and transformers out of the cans where you will put the Protee Bulbs into. If you need any help with that let me know, it's quite simple.
A huge shout out to Jamie PROTEE UK for his excellent customer service, and patience with me even though I didn't take their advice the first time.
I got to play around on it last night for the first time successfully and this Protee sensor mat is spot-on and accurately humbling.
https://www.amazon.com/gp/aw/d/B00LL...b_b_asin_title
https://www.amazon.com/gp/aw/d/B000G...b_b_asin_title
https://www.amazon.com/gp/aw/d/B0090...b_b_asin_title
Please note, you will want the lights to look like a figure 8 without overlapping. This pic shows a slight overlap which can create a shadow.
Also, very important, you want the light over the mat centered directly over the center of the mat (not the tee location) and pointing straight down.
When all else fails, or if you get stuck on anything, don't try to do it yourself...let me say that again..do NOT waste your time just to mess things up. Contact Jamie PROTEE UK or ProTee United Their customer support is off the charts and they are all enthusiastic, sincere, and helpful. Also, they have the most accurate knowledge out there on their amazing Protee sensor mats.
Comment