Face to Path numbers ??????
Collapse
X
-
Yes I have a swing issue...O to I path and closed face. That's why when all of a sudden I show an 11 degree open face I question the reading. To me, that the HMT providing goofy numbers.
-
StanMI, if you are hitting a 60 yard slice then your face to path is very open -- you don't have a HMT issue. On the other hand if you are hitting draws or pretty straight, it's extremely unlikely that your face-to-path is 11 degrees open -- you have a HMT issue. Exactly matching club data and ball flight is hard as there are lots of variables, but the two cannot be that far out of sync.
-
Hey guys - Quick update. My error was the installation of the protective device that the HMT sits it. That was corrected (user error install) an my numbers seem to fly normal.
Leave a comment:
-
Are you putting the 4 dots on your driver face so you can see exactly where contact is being made?
Leave a comment:
-
Set up so your swinging like 10 degrees left of your target line and take a swing. If the face is still saying 10* open, there’s probably something going on with the HMT
-
So you have a swing issue versus the HMT providing goofy numbers. I am just getting exaggerated readings from HMT in the I/O and club face.
Leave a comment:
-
Thanks for all the replies, I do appreciate them.
I'll try to be a little more specific.
I have been trying to create a draw flight (I to O path with a face slightly closed to the path ) that starts Right of the target and comes back to it. My normal swing path is abot 4 degrees O to I with a face that matches. So i hit a LOT of pull draws. Some might call it a Duck Hook. With a lot of work i have come closer to a square path and slightly closed face.
All of a sudden, I'm showing a square path and a face 11 degrees open. Overnight I'm hitting 60 yard slices. I tried turning the face redicusley closed at address and making a swing and it still shows open.
Hope that helps diagnose my issue better !
Leave a comment:
-
Path is not target line. Your fact only applies if the face is closed to path. There are many images that show new ball flight laws with clubface, path and target. You can also get a draw component due to gear affect and extreme lie angles as well.
Originally posted by Matt L View PostI sorry, maybe im getting a little mixed up, I presumed the "Path" was determined as the target line, that way we could judge whether or not we were on path to target..
However, it is a fact that you can draw a ball with an open club face, better known as a, "push draw"...
Leave a comment:
-
I sorry, maybe im getting a little mixed up, I presumed the "Path" was determined as the target line, that way we could judge whether or not we were on path to target..
However, it is a fact that you can draw a ball with an open club face, better known as a, "push draw"...
Leave a comment:
-
There are two ways to generate draw spin: closed club face (to path) and toe hit. A wrong dynamic lie angle can cause a closed club face. This is not the case for me in general and not with my irons or fairway woods and not with my Titleist driver. My HMT simply doesn‘t like Exotics, I have no idea why. I will try the driver at my fitter (when lockdown is over here) to see if it works there but he has a Quad so it won‘t be a perfect comparison.Originally posted by mthunt View Post
This one could be driver lie angle at impact
Leave a comment:
-
The timing on this thread is very interesting. I do also have GC2 with HMT & FSX 2020. Yesterday, I updated to the latest version and noticed my I/O path going from 2.9 to 4.0 to now 8.9 to 11 range and with a face open to extremes. One thing was I added the new metal case that was featured in another thread. In the new case it came with a new screw under the HMT which is higher than what Foresight provided. I switched the screw and saw a decrease in the I/O by a few degrees but the face open seemed still to be more open than normal. I was planning on testing with no case of any sort, then work to the Foresight plastic to the metal case. Then I will had the metal protective case for the HMT back and play with the different screws heights to see if that was the issue.
Leave a comment:
-
This one could be driver lie angle at impactOriginally posted by ElPrimero View PostI have the same problem but only with my driver! Face to path is always open although I have a draw spin. No problems with irons. Funnily enough it works with an older Titleist driver but not with two Tour Edge Exotic drivers. I have also GC2/HMT with FSX2020. Foresight couldn't help so far.
Leave a comment:
-
Usually the face is closed to path though. They stated that the face is open to path so with an in to out swing it should start right and go further right.
Originally posted by Matt L View PostYou can still get a draw with an open face if your swing path is in to out......
Leave a comment:
Leave a comment: