IowaCat89
Senior Member
Last Activity: Today, 06:23 AM
Joined: 01-25-2019
Location:
-
Just to double check I just hit 35 shots in a row with a Gap Wedge and zero missed spin numbers using the 2017 TP5X. Black dots (or at least very dark... -
Well it turns out the new TP5 is blue under the jacket. It will not reliably read. I missed the spin on 12 shots out of 109. Seems to miss the wedges...
-
Yards vs Meters...Leave a comment:
-
I have a new TP5 in my hands now. Will know if it works this evening. -
Correct, I just figured that out. That makes me feel better that it's pretty easy to tell the difference. No reason to waste a good ball that won't... -
I noticed that also. I'm on the hunt for a new TP5. I think the ones I have at home are the old style (they did not work) but I'm not sure. I will...Leave a comment:
-
OK, I feel kind of dumb. Here's an article that clearly shows the newer balls have a different color layer. https://www.golfalot.com/equipment-revi...
Leave a comment:
-
Yes, certainly could, but I'm pretty confident a Sharpie will transfer to the screen. There could be another brand (Like Nalgene) that would do better?... -
Milled TP5X Update
I'm afraid I have some bad news. I ordered 12 Dozen balls and immediately discovered that the current version of the TP5X no longer has the black layer...
-
Here's my template. Simply drill the holes where you want them and then cut the jacket off. Works in a pinch. ...
Leave a comment:
-
Thanks for the info on this glue. So far, I have not been able to find a glue that will withstand a direct strike from the club. Are you saying this... -
I'm planning to make 12 Dozen of the TP5X balls for folks to try. By far the most economical milling option that I can find. This ball would be suitable... -
For comparison, here's a milled TP5X that has many hundreds of wedge strikes. The jacket between the dimples is getting ground down to the point that...
Leave a comment:
-
Well, I hit this ball a few more times and finally got a direct hit on one of the dots and the groove of the club cut the sticker. Probably lasts longer,...
Leave a comment:
-
Positioning the ball by hand took forever, and accuracy suffered. The pattern does not really make a difference in performance, but an even pattern looks... -
Milled Premium Balls
I was playing with the mill today and thought I would see what you guys think about this option. The example ball is a Pro V1X. I milled just a few...
-
That's what I would do. I have had to do that once in the past. I think I had something corrupted? -
This is the link to the version of Ignite that I use successfully:
https://festa-file.s3.ap-northeast-2...TE/20200820/IG...Leave a comment:
-
You can replace the Hard Drive, but you can not switch computers without contacting Uneekor Support (Austin). He will generate a new license for the...Leave a comment:
-
When you look at the pictures above, the vinyl dots tend to get damaged between the dimples when the club or screen cuts the dot against the raised surface...
No activity results to display
Leave a comment: