Spornia SPG-7 with partial enclosure

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tcb121
    Senior Member
    • Feb 2020
    • 101

    #1

    Spornia SPG-7 with partial enclosure

    First, I wanted to say this is an awesome forum and I've learned quite a bit. Here is my situation:

    My simulator will be located in my sunroom that is mostly sliding glass doors all around. Second, my setup needs to be portable because we use the room for more than just my golf obsession. The sunroom has plenty of space for the Mevo+ that I'm planning on ordering and I've been looking for the best solution for portable enclosures / netting. What I've narrowed it down to is this:

    The Spornia SPG-7: https://www.amazon.com/Spornia-Spg-7...079P7WZPH?th=1

    My concern is protecting all the glass in this room so I think I need a bit more protection than just the Spornia net. Was thinking the following options:

    1). Would this work: https://www.amazon.com/ShowMaven-Pho...ustomerReviews

    This photo backdrop looks heavy duty and says it can support 441lbs, I'm guessing that's a bit much but even if it could support just 44lbs that would be plenty to support mesh tarps or heavy duty drapes and such. I would purchase two of these and then just run a mesh tarp over the top for ceiling protection. Would this work and has anyone tried this?

    2). I could build an EMT enclosure that consists of just extended sides and ceiling support. Something like 8' high x 8' wide x 5' long. My guess is this will allow me to hit 56 / 58 degree wedges without fear of clearing the spornia net + give me some shank support in the event that I have some buddies over that have less skill. I would purchase heavy duty mesh tarps and pipe insulation to cover the EMT enclosure similar to what gungho has listed on his site. Ideally configured in such a way that would make it easy to assemble and breakdown.

    Does anyone have any other suggestions for something that could be easily broken down and setup that would accomplish this task? I only need side and ceiling support since I will use the Spronia as my net / impact screen.

Working...