Tweet
Used ProTee Complete full setup minus computer with the following included:
- ProTee Sensor Mat.
- Putting Sensor.
- Vertical Launch Cam.
- Horizontal Launch Cam.
- Horizontal cam mount.
- Vertical launch cam mount and protective casing.
- Double halogen light system.
- West coast netting PR20 10x10 Impact screen.
- Impact screen has sewn in side and ceiling impact netting.
- Overhead flex track so you can adjust/store the side curtains when parking car in a garage or just leave open for a permanent install.
- Custom built putting area that retracts on hinges allowing you to park car in garage.
- Custom built 4x5 stance mat that allows you to pick up with handles and store away to park car. Also has casters built into the stance mat for easy maneuverability.
- Epson 730HD projector.
- Peerless PRG series projector mount with extension pole.
- USB to serial converter for the sensor.
- Power supply for sensor.
- 2 USB active extension cables for the highspeed cameras.
- ProTee 2.0 software with around 80-100 courses.
- Original TGC software that can be upgraded to 2019 with included license transfer.
- All mounting hardware for impact screen. I used an aircraft cable mounting system rather than have balls ricochet off a piping/wood enclosure. Hardware includes carabiners, cable, turnbuckles, eyebolts, bungee etc.
- System does not include a computer as I have put that to other use.
I have loved my ProTee, it was the best simulator on the market for us DIY golfers at time of purchase (Nov 2014). Unfortunately, I had to move in Feb of 2018 and it has been sitting in storage ever since, my loss is your gain!
If person is in the Chicago area, I am willing to help setup the complete garage system in the new owner’s house as I enjoy weekend projects etc. Truth be told I hope the whole system finds a good home. The cable system for the impact screen and netting is unique. I can help explain how it all works including the install of lights, camera calibration etc. Zmax an original forum user lives here in Chicago and he and I worked on getting my system to perfection via a few visits to my house and some remote calls etc.
Lastly, I am willing to separate the system if only interested in the Pro Tee components (with or without license transfer or just the screen etc). My total investment cost was around 6-7k at time of purchase. Pictures below are of the completed build. Currently the screen, projector, cameras, lights and all the hardware are in storage bins in my basement. The stance mat with mounted sensor as well as putting green with putting sensor are stored up against a side wall in the garage.
Again, willing to break the whole system down if someone just wants the ProTee components only.
Shoot me a PM if you are interested or have any questions.
- ProTee Sensor Mat.
- Putting Sensor.
- Vertical Launch Cam.
- Horizontal Launch Cam.
- Horizontal cam mount.
- Vertical launch cam mount and protective casing.
- Double halogen light system.
- West coast netting PR20 10x10 Impact screen.
- Impact screen has sewn in side and ceiling impact netting.
- Overhead flex track so you can adjust/store the side curtains when parking car in a garage or just leave open for a permanent install.
- Custom built putting area that retracts on hinges allowing you to park car in garage.
- Custom built 4x5 stance mat that allows you to pick up with handles and store away to park car. Also has casters built into the stance mat for easy maneuverability.
- Epson 730HD projector.
- Peerless PRG series projector mount with extension pole.
- USB to serial converter for the sensor.
- Power supply for sensor.
- 2 USB active extension cables for the highspeed cameras.
- ProTee 2.0 software with around 80-100 courses.
- Original TGC software that can be upgraded to 2019 with included license transfer.
- All mounting hardware for impact screen. I used an aircraft cable mounting system rather than have balls ricochet off a piping/wood enclosure. Hardware includes carabiners, cable, turnbuckles, eyebolts, bungee etc.
- System does not include a computer as I have put that to other use.
I have loved my ProTee, it was the best simulator on the market for us DIY golfers at time of purchase (Nov 2014). Unfortunately, I had to move in Feb of 2018 and it has been sitting in storage ever since, my loss is your gain!
If person is in the Chicago area, I am willing to help setup the complete garage system in the new owner’s house as I enjoy weekend projects etc. Truth be told I hope the whole system finds a good home. The cable system for the impact screen and netting is unique. I can help explain how it all works including the install of lights, camera calibration etc. Zmax an original forum user lives here in Chicago and he and I worked on getting my system to perfection via a few visits to my house and some remote calls etc.
Lastly, I am willing to separate the system if only interested in the Pro Tee components (with or without license transfer or just the screen etc). My total investment cost was around 6-7k at time of purchase. Pictures below are of the completed build. Currently the screen, projector, cameras, lights and all the hardware are in storage bins in my basement. The stance mat with mounted sensor as well as putting green with putting sensor are stored up against a side wall in the garage.
Again, willing to break the whole system down if someone just wants the ProTee components only.
Shoot me a PM if you are interested or have any questions.
Comment