help with flightscope mevo+ wifi

[6.6leater]

Recently got my sim up and running. Only played 2 rounds on v .18 before switching to v .19. All was good no connection issues. Last week started dropping mevo+ connection to pc playing tcg2019. Will work for a few shots then drops out. Attempt to reconnect, sometimes works sometimes not. Tried wifi repeater, will connect to pc but not to mevo+. Changed setting to bridge on router, worked for 3-4 shots then dropped. disconnected repeater, worked for 6 holes, dropped out. Power of mevo+ and restart. Reconnected and finished the round.

Please, any input on how I can fix this connection issue would greatly be appreciated before I burn this thing to the ground.

My setup is somewhat unusual.

Hitting cage is outside my home, 30' direct line of sight from mevo+ to router, through 1 wall. Shows 1 bar on pc, but on Android shows 3 bars standing outside same wall.

Eithernet from pc to router, wireless USB Dongle from pc to window, 6' from pc line of sight to mevo+

[bubbtubbs]

Have you run a program like inSSIDer to see if your particular 2.4 band is saturated with a bunch of other networks? Sometimes that leads to reduced wi-fi signal, especially if your neighbours get new routers and suddenly everybody's on the same channel.

[6.6leater]

I haven't ran that program. I did see that mevo+ was on channel 36, where other networks were usually running from 1-20s on the channels.