Distances off between GC2 and FR1

[jimmythanut]

I apologize if this has been addressed elsewhere. I searched the forum but didn’t find anything.
I have a gc2 connected to FR1 through Bluetooth. All of the numbers on the gc2 screen and fr1 software are the same (ball speed, launch angle, spin, etc...) except for carry distance. Most of the shots on the dr1 are reading significantly shorter than on the gc2 screen. I have included a couple screen shots to show this. Any help you guys can provide for me would be greatly appreciated.

Edit: I just realized I cut off the labels on the fr1 picture. The carry distance is 214 on the fr1.

[Point280]

What is your elevation setting in FR-1?

[Snaphook]

Is this playing on a course? If so you have elevation and maybe wind effecting the distance in FR1. The carry number on the GC2 is "closed data" meaning at flat surface no wind etc.

[jimmythanut]

Thanks for the feedback guys. I can’t figure out where the elevation settings are at. These numbers are coming from the foresight range driving range with wind set at 0mph. I het some 9 irons tonight and the carry distance on the gc2 is 142 and fr1 range is reading 135. All shots were between 5 and 7 yards short in carry distance. All other numbers were identical. I’m stumped.

[jimmythanut]

I had some time today so I checked the carry numbers with the numbers in TGC. They were all spot on. I for the life of me can’t figure out what would make the carry numbers so far off in FR1.

[BriHeb]

It has to be a setting in FR1 as I still run that software and it's always dead on with the GC2 local LCD screen every time.

[Js1010]

You can check to see if the “Wait for Spin” option in FR1 settings is checked or enabled. I believe this made a difference in the carry.

Should also check to make sure you have the latest update for FR1. Belive it was 1.30.