Looking for some help or comments

[4 Degrees Flat]

Haven't used my GC2 in about 5 months or so due to playing golf outside in nice weather. When I went to start everything up, I was having connection problems with the "status output". I read and reread all the posts here and couldn't diagnose my problem. I have all the same stuff (same bluetooth, software, etc) but couldn't get it to connect. I re-paired my GC2 with the bluetooth, updated drivers.. nothing worked. Just 10 minutes ago I gave up and sent a help ticket to ProTee. I was hoping maybe someone had an idea before ProTee gets back to me. I use Windows 10 btw.

The GSX I'm using is 0.6.7. The ProTee interface I WAS using was version 3.05. I noticed there was a newer version available... 3.06. So I figured what the heck - I'll try that. Still didn't connect. Then I changed the port setting to COM3 instead of 4 like it's supposed to be. Voila... it worked. But.... it only worked once. I went back again and now it won't connect.

Any ideas?

[jasefarrell74]

Hi mate, try changing the outgoing port back to 4 or even another number. Not sure about TGC but with PG I have to change ports every time I connect.

[4 Degrees Flat]

First off, it shouldn't matter if I'm using PG or TGC since neither one of those is even started up at this point. Just trying to connect. Having said that, I just connected again with port 3.

I hear what you are saying... but we shouldn't have to change ports every time we connect. We never had to before... plus how would we know which port to try?

[jasefarrell74]

With PG interface we can use up to port 15, I know we should not have to change ports but my GC2 will not connect unless I do, not sure why. Hope you get it sorted.