Driver trouble

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jb50
    Advanced Member
    • Feb 2016
    • 266

    #1

    Driver trouble

    Thought I would start a new thread on using Rmotion driver. I saw that rhart was having issues with his driver not reading correctly since the last update. At the time I had not really used my driver. I was concentrating on irons only. Yesterday I was hitting driver and it started out fine. Then all of the sudden it started reading like I was hitting a wedge. Very high launch angles and short shots. Most of them going left. The left part may be true because I'm fighting going left. However the short distances and popups aren't accurate. and I'm saying as short as 60 yards on a very well struck shot. Many others were around the 130 carry. Not sure what happened but I restarted and same thing continued. All other clubs seemed to be reading accurately. Anyone else noticing this?
  • Rapsodo
    Manufacturer
    • Feb 2017
    • 114

    #2
    Guys. We will release 1.3.1 fixing this driver issue as soon as Monday. Pls stay tuned.

    Comment

    • Jb50
      Advanced Member
      • Feb 2016
      • 266

      #3
      Good news. Thanks Rapsodo

      Comment

      • Jb50
        Advanced Member
        • Feb 2016
        • 266

        #4
        Rapsodo I started having troubles with the Rmotion reading shots the other day. Anyone else having any issues? I was playing a round and it was working fine. I didn’t have any no-reads for 7 holes. Then on the 8th hole it wouldn’t read my hybrid. Then on the 9th hole it took 3 hits to read driver and then problems every shot trying to finish the hole. Today I was trying to play a round again and this time it read fine for 1 hole and then I couldn’t get it to read. I shut down and started again. It again read 1 hole ok (it did miss a hybrid shot) then wouldn’t read on the next hole. I switched from driver to 7 iron to see if it would read and after 2 shots it read the 7 iron. I tried another shot and it wouldn’t read then when I set up behind the ball it made a shot that went about 10 yards without me doing anything. I tried again and again no read. Exited out and restarted and went to the driving range and could not get it to read any shots at all. So I shut it down. I was getting a green light for every shot. I may try going back to an earlier version.

        Comment

        • Rapsodo
          Manufacturer
          • Feb 2017
          • 114

          #5
          We are sorry to hear your problems. Can you turn on the diagnostic mode? It will be helpful to understand the root cause of your issue. Thanks.

          Comment

          • Jb50
            Advanced Member
            • Feb 2016
            • 266

            #6
            Yes. Will do next round I play.

            Comment

            • carocane
              Junior Member
              • Oct 2017
              • 3

              #7
              I have had the sim a couple of months with no issues but now I'm having the same issue. Never had a problem with the tracker until a week ago when it stopped being able to read driver and woods. I've tried hitting off the tee and off the mat, but neither will read. It reads irons and putter, though. Also, I can tell it that I am hitting driver, though I'm actually hitting a 3 iron, and it reads it just like a driver. I've spent countless hours moving the clips around the clubs, trying to figure out a way to make it read, but to no avail. I even moved the dongle to different usb ports, that didn't help, either. I ran the diagnostic a few days ago, so hopefully they'll have some feedback for me soon. This is a great little simulator, my daughter and I are on it constantly, so I hope it is something that can be easily fixed. Jb50 , let us know if you try an earlier version, if it works or not. Thanks!

              Comment


              • Jb50
                Jb50 commented
                Editing a comment
                carocane I haven't gotten back on the simulator yet. Been a busy week. I want to do the diagnostic first then I may try a previous version. I will post when I do. Hopefully tonight although I'm being told we're carving pumpkins tonight.
            • Rapsodo
              Manufacturer
              • Feb 2017
              • 114

              #8
              carocane, Can you tell us your User ID? We will look into your data. Thanks.

              Comment


              • carocane
                carocane commented
                Editing a comment
                I think it's my name, Dwayne Taylor, but the ticket Id is 4392. Thanks.
            • Jb50
              Advanced Member
              • Feb 2016
              • 266

              #9
              I hit some balls with the Rmotion yesterday and had consecutive no-reads with a wedge. At this point I turned on diagnostics but I never had a no-read again with the exception of a couple of toed shots that didn't read. I believe the two wedges that didn't read were because I didn't set up behind the ball for a second. I think I started my backswing too soon. I did have some strange driver reading again thought. Several very high pop ups to the left. I also had a couple of very low shots in there too. My User ID is JB50.

              Comment

              • carocane
                Junior Member
                • Oct 2017
                • 3

                #10
                So, after turning on diagnostics, they still couldn't find the issue. However; I think I might have stumbled onto the issue. I have my setup in a carpeted garage ( yes, carpeted; I added the carpet because I was scared I'd drop that tiny tracker at some point). Anyways, the garage never gets too cold, but the temp had dropped about a week or so ago (about the time my troubles started). The last couple of days it has been much warmer. Last week the garage was around 60-62 degrees and now it is 68-70. Yesterday, I was able to hit my driver and 3/5 woods, still with several miss reads, but at least it was reading some. Today, it is even warmer and after playing 18, I had maybe 6 miss reads total. I'll continue to monitor the situation, if anything changes, I'll keep you posted.

                Comment

                Working...