EXputt and Mevo Plus

[BAlgiere]

Is there a way yet to use EXputt and Mevo Plus together in the GSpro software?

[ZyonG]

Currently, there is no way of putting them together, but there is a workaround for it.

Here is how you do it:

You will need to use a third-party software called GSPro Connector.

To set up GSPro Connector:

1. Download and install GSPro Connector.
2. Open GSPro Connector and select "EXputt" as your device.
3. Click the "Connect" button.
4. Open GSpro and select "GSPro Connector" as your device.
5. Click the "Connect" button.

Once you have connected both GSPro Connector and GSpro, you should be able to use EXputt to putt in GSpro.

Note: This is a workaround and is not officially supported by GSpro or EXputt. There may be some compatibility issues or other problems.

If you are using this workaround, it is recommended that you back up your GSpro data regularly.

Another option is to use a different golf simulator software that supports both EXputt and Mevo Plus. One such software is E6 CONNECT.

To set up E6 CONNECT:

1. Download and install E6 CONNECT.
2. Open E6 CONNECT and select "EXputt" as your putting device.
3. Select "Mevo Plus" as your launch monitor.
4. Click the "Connect" button.

Once you have connected both EXputt and Mevo Plus to E6 CONNECT, you should be able to use EXputt to putt in E6 CONNECT.

E6 CONNECT is a paid software, but it does offer a free trial.

This took me ages to make and I hope this helps you man

Cheers

[Chappy8]

I realize this is an old post, but does it work for E6 on iPad? I’m sort of guessing you need the PC version since you’d need dual Wi-Fi? I also don’t see ExPutt listed on E6 as supported but I guess it isn’t a “full” launch monitor.

[wbond]

ZyonG is it required to have the new version of exputt? I am curious as to how exputt actually connects to either software.

[BAlgiere]

Thanks ZyonG. Just one more question can you still use Mevo + for driving and irons, but then switch to EXputt for putting with the conecnter you describe?

[ZyonG]

ZyonG is it required to have the new version of exputt? I am curious as to how exputt actually connects to either software.

If anything I recommend that you use the latest version of Exputt if you are able to. If you are unable to use the latest version of Exputt, you may still be able to use the workaround, but there is a possibility that you may experience some compatibility issues or other problems.

If anything you can always contact exputt or gspro support to help you out

[ZyonG]

Thanks ZyonG. Just one more question can you still use Mevo + for driving and irons, but then switch to EXputt for putting with the conecnter you describe?

Yes, you can still use Mevo+ for driving and irons, but then switch to EXputt for putting with the connector

To do this, you would first need to connect your Mevo+ to GSPro Connector. Once Mevo+ is connected to GSPro Connector, you can then connect your EXputt to GSPro Connector.

Once both Mevo+ and EXputt are connected to GSPro Connector, you can then switch between the two devices in GSPro. To do this, simply click on the "Device" menu in GSPro and select the device you want to use.

For example, if you want to use Mevo+ for driving and irons, you would select "Mevo+" from the "Device" menu. Once you have selected Mevo+, you can then start hitting drives and irons.

If you want to switch to EXputt for putting, you would simply click on the "Device" menu in GSPro and select "EXputt". Once you have selected EXputt, you can then start putting.

Here is a step-by-step guide on how to switch between Mevo+ and EXputt in GSPro:

1. Connect your Mevo+ and EXputt to GSPro Connector.
2. Open GSPro.
3. Click on the "Device" menu.
4. Select the device you want to use.
5. Start hitting drives and irons, or putting.

I know this might sound a bit confusing, but I hope this helps you out

[BAlgiere]

Thank you for the information this helps a lot.

[BAlgiere]

I came across Joe Lagowski on YouTube (If you have not seen any of his videos yet he is great, a lot of info on different simulators and GSPro), he has a video on a connector between either Mevo + or MLM2PRO, EXPutt, and GSPro. The connector is from Springbok and the link is below. I also linked Joe's YouTube video on how to set it up. The video is on the MLM2PRO setup but is the same process for the Mevo +.




https://github.com/springbok/MLM2PRO...Jvo_bAPbMyozpY doDexjSb_dv4EM3CMfQ

https://www.youtube.com/watch?v=9wt06I_euHs

[umbighouse]

Does the GSPro Connector for the Mevo+ work with webcam putting? I’ve used the Springbok connector, but it doesn’t seem to send the Club Path or Face to Path data to the OpenAPI\Advanced window. Those metrics come with the Mevo+ Pro package.