New Install

[Golfer1204]

So I am just beginning my build. I have a designated area framed in. My room size is 10 feet high, 14 wide, and 20 long. I'm going to be going with the skytrak.
My question at this time is media wiring.
I will have a tv mounted on wall, desktop computer designated only for play, benq2150 st projector. I would also like to connect 2 speakers in ceiling for sound.
If anyone has this, how did they wire there set up?

Thanks


Sent from my iPad using Tapatalk

[goatbarn]

Will depend on what outputs your PC has from the video card.

At the very least, I'd recommend installing conduit within the wall with jet lines (2+) for future pulling of additional wires without having to destroy/repair drywall.

You're going to want HDMI, CAT6, USB 3, and electric run in your walls to each spot. Speaker wires should be installed where needed as well.

Everything will originate from the PC, so you'll want plenty of room for that.

[afmilboy02]

x a ton w/goatbarn! Plan for the future and your "dream" setup while under rough construction. Solid plan and keep us posted as I am sure it will be great!

[Golfer1204]

I have outlets on ceiling for projector along with outlet where tv will be mounted, along with an outlet for computer.
I have pulled a hdmi from projector to where computer will be. Cat6 cable pulled to same location. I have cable wire pulled to TV recessed box. I can pull a USB 3 from computer area.
My computer will have an HDMI port.
So the only cable to the projector, will be the HDMI from the computer??
Will I run the speakers out of the computer??
One other idea if possible, can I just run everything into a receiver, then the HDMI to project

Sent from my SAMSUNG-SM-G920A using Tapatalk