Motorized Sportscreen Skytrak Garage Build

[Ttime65]

Hi Fran, Great build you put together! Did you not use the black sportscreen and just attach the stealth screen directly to the roller? how is it holding up? I have both attached but it seems like the sportscreen adds too much weight to the roller.

[Fran M]

What is the name of that teeing contraption you're hitting off of and standing on? (sorry I have no idea what the technical term might be -lol).

It's a Fiberbuilt Practice Station. It assembles in a few squares, super heavy duty rubber mat and low impact turf.

I've hit hundreds of balls per night in my garage and no impact issues to the joints. Having tendonitis and being in my early 50's, all the cushion the better!

https://www.costco.com/Fiberbuilt-Go...100461497.html

Swing has improved because of it

[What4]

What is the name of that teeing contraption you're hitting off of and standing on? (sorry I have no idea what the technical term might be -lol).

[rharris]

Thanks! Appreciate the link

[Fran M]

WHere did you find those wall mounted mat clips?

I bought them off Ebay:

https://www.ebay.com/itm/2pc-Stainle...pe!06002!US!-1

[rharris]

WHere did you find those wall mounted mat clips?

[Fran M]

What size impact screen is that, and how is it attached?

It's 10x12. I had a piece of velcro sewn in at the top of the screen on the 12' edge. This allowed me to roll the screen a few times over to take pressure off the velcro. Some guys use industrial grade velcro that has double sided tape instead. The roller side has a double sided taped piece of velcro attached to it.

The viewing screen ends up being 10x10

[Ac18]

What size impact screen is that, and how is it attached?

[Fran M]

Great set-up! Forgive me if you already mentioned this: Did you add any insulation on or around the garage door?

I live in CT as well. (Glastonbury). I have a 3 car garage and would love to get heat and AC in there (probably use intermittently). Would you still recommend going with the mini split?

Dan

What impact screen you go with and what do you have behind screen looks great

Cmckelvmi:
I did not add any insulation to the garage doors. The wall of the garage door and wall behind the sportscreen are not insulated. The ceiling and other two side walls are. Those walls are the interior of the house



Dan:
You are more than welcome to come over and check out the setup if you'd like: we are close I am in Bloomfield. If you need the contact for the mini split, let me know. Looking forward to hitting balls in the dead of summer in AC.
I've been hitting a few hundred balls a night since I put it in.


Lefty:

It's a PAr2Pro SQ Raw, I have nothing behind the screen. The Par2 Pro Screen is holding up great, lot of impact into the same area as I've been hitting PW, 9&7 irons. Haven't hit driver yet, been focused on a few swing changes.


I absolutely LOVE this setup. Wife isn't too thrilled being a golf widow all winter long though.

[cmckelvmi]

Great set-up! Forgive me if you already mentioned this: Did you add any insulation on or around the garage door?

[DMarrero]

I live in CT as well. (Glastonbury). I have a 3 car garage and would love to get heat and AC in there (probably use intermittently). Would you still recommend going with the mini split?

Dan

[LeftyLeff52]

What impact screen you go with and what do you have behind screen looks great

[Fran M]

Please update after the minisplit goes in. I'm very interested to hear how well it works this winter. I see that it says it can still produce heat at -5F. I have a garage sim as well and was considering installing one. Part of our house wraps around behind the garage and that room is always too hot in summer and too cold in winter. I am thinking about getting a mini split with two indoor units and single outdoor. My main concern is how well it will actually work in the cold weather. I'm in Mi and it can get quite cold here.

This part is a little confusing though on actual operating temperature.

• Fujitsu's low temperature heating technology allows this condenser to safely maintain its rated capacity in outdoor temperatures as low as 20 degrees Fahrenheit. The AOU15RLS3 can operate in heating mode in conditions as low as -5 degrees Fahrenheit.

Thought I'd post again on the heat.....

The heat, it's awesome! We hit single digits last week with a lot of wind and the garage can maintain 68 degrees with ease. In about an hour I can go from 48 degrees to the mid 60's. It can get very warm, I am out there hitting in summer golf pants and a T-shirt. It has a low heat mode which can maintain the temp of 50 degrees, I typically leave it at that when temps are down in the 20's. My garage would get to the mid 40's without any heat.

I am out there practically every evening for 2-3 hours. First months electric bill went up about $45, money well spent. Very pleased with the setup, winter in New England isn't so bad anymore!

[Fran M]

Looks great, I am thinking of a very similar setup. A few questions if you don't mind. Where did you get the extender arm for your garage? How far from your screen are you hitting from, and what distance is your BenQ projector mounted? I will have a 10x10 screen as well, and I have not been able to find a good projector set up yet. Thanks for the detail, it has helped me plan!

Glad to be of help.

I got the extender arm off Ebay. It's a Genie 26012D Straight Door Arm

The BenQ Th671ST is mounted 10 feet from the screen. You can use this calculator to see what projector distance you need:

https://www.projectorcentral.com/Ben...ulator-pro.htm

I like the BenQ as it has an optical zoom which allows you some flexibility on where you mount it. Example, if you were to mount it at 10' 3", you'd use the zoom to get it precisely where you want it on your screen. The Optoma 1080Darbee for example does not have an optical zoom which makes moutning a bit more cumbersome.

I hit anywhere from 8-9 feet away, depends on where my mat is when set up. As I don't have any ceiling or side protection yet, the closer the better

[rbrogden]

Looks great, I am thinking of a very similar setup. A few questions if you don't mind. Where did you get the extender arm for your garage? How far from your screen are you hitting from, and what distance is your BenQ projector mounted? I will have a 10x10 screen as well, and I have not been able to find a good projector set up yet. Thanks for the detail, it has helped me plan!