I thought I'd share my latest Simulator setup. I discovered the Sportscreen remote control screen via Par2Pro.com. This video shows some of the challenges I had to do the install and what I learned in the process.
Here's the link to the video I did on the setup: https://vimeo.com/410922576
Here's a link to the camera I purchased. This camera works great and will save you several hundred dollars! https://www.amazon.com/Varifocal-2-8-12mm-Webcamera-Compliant-Adjustable/dp/B07R4CLRQH/ref=sr_1_1_sspa?dchild=1&keywords=2.8-12mm+Varifocal+Lens+USB&qid=1587651344&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzNVlPO EYyRzdNUjZKJmVuY3J5cHRlZElkPUEwOTg5MDEzMzlTMVdKRUN WTkhZOCZlbmNyeXB0ZWRBZElkPUEwODk3ODEwMUJRQUs2WjBQU FZWVCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWR pcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
- Great thing about this camera is that it's USB2 instead of USB3. Doesn't require any special USB cable. Foresight FSX2020 recognized it immediately
Here's a link to the Microsoft Wireless HDMI Video adaptor: https://www.amazon.com/Microsoft-Wireless-Display-Adapter-Hdmi/dp/B01C9YTI9S/ref=sr_1_1?crid=7SSTO2IKSTUX&dchild=1&keywords=mic rosoft+wireless+display+adapter+v2+-+hdmi%2Fusb+miracast+dongle&qid=1587651502&sprefix =microsoft+wireless+hdmi+%2Caps%2C261&sr=8-1
- This adapter works Great! No lag was noticed at all compared to other adapters. My next door neighbor uses this.
- The Eiki projector from Par2Pro is 1st rate. 5500 lumens and in my opinion focusses to a crisper image than any projector I've ever owned. I had a Panasonic before and the Panasonic focus would be sharp in the middle and a little fuzzy on the edges.
- Sportscreen Setup feedback: They need to enhance the remote programming instructions for the upper and lower limits of the screen to include 2 options: Motor mounted on Right and Motor mounted on left. It took me a minute to figure out that the instructions you sent me were backwards based on my setup.
- The black mesh Sportscreen backing is not required if you order an impact golf screen from Par2Pro. I cut the backing off at the top just below the thick velcro. The golf screen attaches at rolls quite nice. If you prefer a backing, I'd suggest doing a different backing for golf applications. A thinner material (a tackle twill for example) and not do the velcro strip in the middle so you don't see the strip in the screen when the projector is on.
That's it. I hope this is useful for someone.
Chuck Gleason
Payson, AZ (www.rimgolf.com)
Here's the link to the video I did on the setup: https://vimeo.com/410922576
Here's a link to the camera I purchased. This camera works great and will save you several hundred dollars! https://www.amazon.com/Varifocal-2-8-12mm-Webcamera-Compliant-Adjustable/dp/B07R4CLRQH/ref=sr_1_1_sspa?dchild=1&keywords=2.8-12mm+Varifocal+Lens+USB&qid=1587651344&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzNVlPO EYyRzdNUjZKJmVuY3J5cHRlZElkPUEwOTg5MDEzMzlTMVdKRUN WTkhZOCZlbmNyeXB0ZWRBZElkPUEwODk3ODEwMUJRQUs2WjBQU FZWVCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWR pcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
- Great thing about this camera is that it's USB2 instead of USB3. Doesn't require any special USB cable. Foresight FSX2020 recognized it immediately
Here's a link to the Microsoft Wireless HDMI Video adaptor: https://www.amazon.com/Microsoft-Wireless-Display-Adapter-Hdmi/dp/B01C9YTI9S/ref=sr_1_1?crid=7SSTO2IKSTUX&dchild=1&keywords=mic rosoft+wireless+display+adapter+v2+-+hdmi%2Fusb+miracast+dongle&qid=1587651502&sprefix =microsoft+wireless+hdmi+%2Caps%2C261&sr=8-1
- This adapter works Great! No lag was noticed at all compared to other adapters. My next door neighbor uses this.
- The Eiki projector from Par2Pro is 1st rate. 5500 lumens and in my opinion focusses to a crisper image than any projector I've ever owned. I had a Panasonic before and the Panasonic focus would be sharp in the middle and a little fuzzy on the edges.
- Sportscreen Setup feedback: They need to enhance the remote programming instructions for the upper and lower limits of the screen to include 2 options: Motor mounted on Right and Motor mounted on left. It took me a minute to figure out that the instructions you sent me were backwards based on my setup.
- The black mesh Sportscreen backing is not required if you order an impact golf screen from Par2Pro. I cut the backing off at the top just below the thick velcro. The golf screen attaches at rolls quite nice. If you prefer a backing, I'd suggest doing a different backing for golf applications. A thinner material (a tackle twill for example) and not do the velcro strip in the middle so you don't see the strip in the screen when the projector is on.
That's it. I hope this is useful for someone.
Chuck Gleason
Payson, AZ (www.rimgolf.com)
Comment