The Scramble Tour won't be stopped this winter!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JTHudson
    Junior Member
    • Jan 2023
    • 6

    #1

    The Scramble Tour won't be stopped this winter!!

    This has been a dream of mine for years. I have been researching golf simulator setups for it seems like forever, wired a space for it when we built and finally getting close to having it done. A few odds and ends, fine tuning projector, some art, control box, maybe a lean on bar to incase the Mevo and hold clubs. Missouri winters will no longer stop the Scramble Tour in Little LA.

    New Member here though have read through 1000's of posts which helped guide me along with friends to completing my build, so thank you!

    Since I took these pictures, I have moved my projector back to fit the screen, installed a flat extension cord under foam square flooring for Mevo power, countersunk the hitting mat into the tiles, Countersunk Mevo into tile for less movement, and added a ramp in front of the mat for returning balls.

    Left to do: Maybe build a lean on narrow bar that will encase the Mevo and have a place to lean clubs, people can stand or sit on other side. Work on graphics card and TGC resolution settings, I'm still kind of lost on this part even after doing all the calculations and what not. Build Control Box, everything should be in by tomorrow.

    Specs
    My space is approximately 14’Wx25’Dx9’H. I prewired for the projector when finishing basement but if that isn’t an option you could run your wires and use a wire hiding kit from amazon or local store. We stream our TV with YoutubeTV and other apps, and watch a lot of sports. I didn’t want the TV’s in the basement to be out of sync so I have a fire stick that goes into a 4 way splitter then out to the 3 other TV’s and one to the projector (yes you can watch games and movies on your sim too).


    You will need about 12 inches behind your screen as a buffer from the wall, so keep that in mind when planning out your distances in your space. 8-10 feet from screen to where you hit and 7-10 from hitting area to Mevo Plus. After you’re done you can adjust the bounce back (how far the ball comes back off the screen after impact) by adding or removing ball bungees that secure the screen.


    I set this up with a center hitting mat so LH and RH golfers could play at the same time without having to move anything. That is also why I went with the Mevo Plus, it sits behind the hitting path and not off to the side of the ball like other models which make it almost impossible to play together.


    TGC2019 is one of many software options available, but wow! You can do so much with this, including designing your own course or playing the best courses in the world! A lot of people design their home courses so you’d be surprised how many there are. You can also play online with friends or join online societies. You’ll need a gaming computer to run it so if you’re looking to shave some money off you could go with an iPad and the free software or a cheaper upgrade.


    I ran some strip LED lights around the outside of the enclosure, looks cool but not necessary. Very cheap though if you decide you like it. I basically just did it so it would glow Red for Chiefs and Cards Game and Yellow for MU and the Masters. Lol I ran power to the Mevo under the foam flooring using a flat extension cord.

    List of products and links in comments.



  • JTHudson
    Junior Member
    • Jan 2023
    • 6

    #2
    • Carl’s Golf Enclosure. I used the DIY 8.5 x 11.5 Enclosure Kit with Premium Impact screen, pipe framing kit, and foam insert kit $2109.85https://shop.carlofet.com/golf-enclo...-impact-screen Don’t cheap out here, get the Premium Screen. Picture is better and these suckers take some abuse!
    • BenQ TH685P 1080p Gaming Projector $799. I have it about 15-17 ft from screen, if you don’t have enough room go with a short throw projector. There are projector throw calculators online.https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 BenQ has a team dedicated to Golf sim setups, you can chat with them online or by phone. So many options when it comes to projectors. My plan was to go with this model now and upgrade to a Laser model in the future. I wish I would have went with BenQ TK700STi short throw but like I said I’d like to get a laser model down the road. Update: after repositioning to fit the entire screen I do think a short throw would be better.
    • Fiberbuilt Grass Series Studio 9x4 Center Hitting Mat $1349. Fiberbuilt mats are awesome, same mats used by most clubs for driving ranges. Center hitting piece can be replaced but should last a single person a LONG time. The base is heavy duty and the mats are great to hit off of. I did center hit because I had the room and left-handed and right-handed players can play at the same time.https://fiberbuiltgolf.com/products/...ing-studio-mat
    • HDMI Cord 25’. Plenty to choose from on Amazon, I always try to get longer than expected just in case.
    • USB WiFi adapter $16. The Mevo connects to your gaming PC using WiFi. You can run an ethernet cord to your PC for internet access or get one of these so you can have two WiFi connections at once. Without internet you’ll be missing out on courses, online play, friends, and a slew of other options available.https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
    • I am making a control box that will sit on the floor by the hitting area so you can aim, change clubs, hole fly by, and so on without having to go to the computer $28. It will probably be under 50 bucks but I haven't completed it yet to know for sure. You can use any box, Clint even used a cool shoe box for his first one and now a big Titleist box with plexiglass around it. Here are the buttons to order.https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1


    Total $8593.83 +/- tax and shipping cost on some items.

    Helpful Links

    https://golfsimulatorforum.com/ Everything under the sun has been tried, tested, and documented by someone in here.


    https://www.projectorcentral.com/pro...ulator-pro.cfm It will show the throw of the model you are looking at.


    https://www.benq.com/en-us/business/...gaAiMJEALw_wcB Chat with a specialist if you have questions, it’s free use it!


    https://www.carlofet.com/ Carl’s Place, a go-to for about anything you need and awesome customer service.


    https://fiberbuiltgolf.com/ Mat specialists. They are out of Canada so they speak a little funny but great to work with and again outstanding customer service. Their shit lasts!


    https://flightscopemevo.com/ Makers of the Mevo Plus


    https://calculateaspectratio.com/ Aspect Ratio Calculator when setting up your graphics and resolution.


    And www.youtube.com of course for any setup or question videos.

    Comment

    • VancouverCPA
      Junior Member
      • Jan 2023
      • 8

      #3
      Really appreciate the time and effort with this post! Hoping to do a similar build ASAP and planning to use a lot of the gear you have.

      Comment


      • TripleBogeyPar
        TripleBogeyPar commented
        Editing a comment
        Check out Bullseye Golf in Canada I got most of my setup from them. Great company to deal with
    • Tom Howarth
      Senior Member
      • May 2020
      • 172

      #4
      Looks fantastic.

      Comment

      • Brettster
        Extreme Member
        • Aug 2014
        • 921

        #5
        Awesome job JTHudson - thank you for post and the links.... I wish I had that kind of space, but had to do mine in 16'x12' shed... also, limiting my Mevo+ purchase, so going with Garmin Approach R10. I'm curious if you have ever tried something like 6' Mevo+ to Ball and 8'6" ball to screen, and does it still give good readings? I'm trying to decide if it can work at that closer depth?

        Thanks for the post, have fun!
        -Brett

        Comment


        • JTHudson
          JTHudson commented
          Editing a comment
          I have hit at 8' from screen to mat and 7' to Mevo with no problems.
      Working...