New garage retractable sim build

[mjzalenski]

New Garage simulator build. I have a 26x10x10.5 space running across the back of my three car garage. Wife isn't loving having a dedicated space for the simulator. So I've designed it with some degree of retractability. Plan on having Long lag screws dropped from ceiling with Steel Cable running with tensioner. Plan on getting sim 7x7 Net with attachable impact screen. Will have additional netting and black tarps on sides, back, and top to help with stray shots and light control. Plan on using a white and red launch monitor that allows for putting (don't know what is banned) (ideally with a company who has a new lawsuit against them). Grabbing a carpet mat and 8x8 turf with 4x5 mat behind it making hitting area about 10' from screen and 8 ft from LM with some extra space for inconsistent ball placement. I have enough space with all clubs, but will need to be just 3.9' from side wall to avoid Low hanging garage rails. Will be able to roll up turf and mat, and slide netting back along the steel rope to consolidate setup when not in use.

Questions that I have:
1. Any general thoughts or concerns about this build?

2. For Right side which is adjacent to wall, I have 1 ft given, and plan on having both impact netting and tarp to provide extra barrier with tension applied by weights at the bottom. Do you guys think this will be enough? Should i place a moving blanket or carpet pad for extra protection?

[COgolfengineer]

You can check out a motorized roller for the screen and side net/curtain from METechs. Very affordable option. For the right wall, a curtain is easy.

https://www.metechs.com/store/index.php?main_page=product_info&cPath=18&products_id=416635

For the LM, I recommend a camera unit over radar indoors. A lot of Mevo+ users complain about chipping and putting as well and later change to a camera LM. You can see more diacussion on this topic here.

https://golfsimulatorforum.com/forum/golf-simulator-forum/simulator-builds/383516-projector