Tweet
E6-Connect is amazingly good with the original Tittle-X. Everything plays very realistically, and 'my hat is off' to the developers that worked on this. The physics all seems modeled well and no doubt, that took a lot of work. Device-specific aspects may need some attention at least with the Tittle drivers. Pitch, chip and drive all seem to work amazingly well, but putting is just AWFUL!
Background: I'm using my own real clubs, striking real balls with Tittle (not the swing stick). I have the simulator settings for 'difficult','difficult', 'Real Wood +5%', 'Real Irons 0%' and with a Simulator setting of 8 on the STIMP (what a typical municipal golf green would play). When putting, It would take a real effort putting 10ft. On the flat putting green in the practice area, 20 ft to hole, to move to ball 20ft really required a very strong, high-velocity smack. So a short back-stroke and very fast down-stroke and long follow-through would almost get it. To putt using Tittle is very unrealistic in E6-Connect. When comparing a Stinp=10 practice green live to E6 Connect, stinp=10 with Tittle on real-clubs (and using real balls), the carry distance of the E6 connect was always half if not less.
Something is wrong with the device-specific aspects when putting with Tittle. As a last resort, I went to the administrative settings and set the green-stimp to 16 (an unheard-of maximum it will go) just to get my putting surface to match one-to-one a known stinp=10 surface. I would like to report this as a bug. In its current form, the putting simulation aspects using Tittle are wrong, making all aspects of that part of the simulation phony.
Background: I'm using my own real clubs, striking real balls with Tittle (not the swing stick). I have the simulator settings for 'difficult','difficult', 'Real Wood +5%', 'Real Irons 0%' and with a Simulator setting of 8 on the STIMP (what a typical municipal golf green would play). When putting, It would take a real effort putting 10ft. On the flat putting green in the practice area, 20 ft to hole, to move to ball 20ft really required a very strong, high-velocity smack. So a short back-stroke and very fast down-stroke and long follow-through would almost get it. To putt using Tittle is very unrealistic in E6-Connect. When comparing a Stinp=10 practice green live to E6 Connect, stinp=10 with Tittle on real-clubs (and using real balls), the carry distance of the E6 connect was always half if not less.
Something is wrong with the device-specific aspects when putting with Tittle. As a last resort, I went to the administrative settings and set the green-stimp to 16 (an unheard-of maximum it will go) just to get my putting surface to match one-to-one a known stinp=10 surface. I would like to report this as a bug. In its current form, the putting simulation aspects using Tittle are wrong, making all aspects of that part of the simulation phony.
Comment