Enclosure side walls

[Miura Mario]

Hey guys,

so im thinking of putting a chain linked plastic material with 2 layers of carpet underpad on my top and sidewalls of enclosure but dont know what to finish it with?? posibly a black canvas tarp or cordura?? thaughts??

[aeroburner]

any reason for going that extreme

[Griffinto]

Here is what I used for sides and top. I used heavy duty stitch witchery and Semi Flat Felled Seam with iron to connect the canvas. I was going to sew it but was very impressed with the strength of the stitch witchery.

http://www.bigduckcanvas.com/discounted-fabrics-overstock-factory-seconds/12oz-carhartt-black/

https://www.amazon.com/gp/product/B012E7LUQY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

[Miura Mario]

I like that.. and hows it held up? Griffinto

What do you suggest I do aeroburner what part of it is overkill? im just concerned about spinning wedges into the top section..

[aeroburner]

I Run a construction division and our civil side has landscape fabric its 12 feet wide and comes in a 250 foot roll this is used for separation between dirt and gravel base this is very inexpensive if not free if you have a source and very durable, i unrolled 50 feet of it and wrapped 3 sides continous and threw the top on it and was done in like 30 minutes my boy shanked a driver into the side wall a couple times no issues and i will open up my LW for a 75 yard shot and will put this off my fabric ceiling all the time and i have never hurt it. this is in every excavation yard in the country and is easy to find.

[Miura Mario]

Ok.. thats what Ill use - also in construction so it should be free.. was thinking that felt barrier would explode with a few shots.. ill still run the underpad behind it just because i have it..

aeroburner

thx!

[aeroburner]

Ok.. thats what Ill use - also in construction so it should be free.. was thinking that felt barrier would explode with a few shots.. ill still run the underpad behind it just because i have it..

aeroburner

thx!

no worries

[pkim813]

aeroburner Looking at getting some landscape fabric at Lowes... does this look similar/adequate to what you've used?

https://www.lowes.com/pd/Sta-Green-P...50-ft/50121885

How did you get yours to stay tight? Did you fasten yours to your metal structure? Should I wrap it around the EMT and use some sort of adhesive to stick it to itself? thanks for any advice you can give!

[aeroburner]

Wrap it around and use black zip ties to keep taut. I would look for a taller piece and have some I will send you if you want to pay shipping costs let me know how many feet you need

[pkim813]

thanks! I may try the ones from Lowes first since it's local.. Not to sound like a complete idiot, but trying to picture what you described... after I wrap one end tightly around one of the EMT conduits, how do I apply the zip ties? Do I punch a hole through the fabric to get the zip tie through?

[aeroburner]

correct on poking a small hole once you get it to your preferred tension