Fiberbuilt v CCE
Collapse
X
-
Doesn't really make sense to me though if you are hitting the ball first as we should, the surface shouldn't matter at all I would think
-
Very interesting read, and a little discouraging if hitting off a mat actually takes off that much spin. I realize the test wasn't too extensive and not done by a robot but they are still pretty consistently lower through 10 shots on each. Wish they did tests like this for every type of mat out thereOriginally posted by mthunt View PostJust curious but the CCE is the gold standard in mats. In fact Trackman even used it in comparing Mats to grass (below). If you hit it fat you lose distance. Isn't it good to working on hitting it solid? The fibre built is really forgiving. Maybe too much?
http://blog.trackmangolf.com/mats-vs...ts-difference/
Leave a comment:
-
Just curious but the CCE is the gold standard in mats. In fact Trackman even used it in comparing Mats to grass (below). If you hit it fat you lose distance. Isn't it good to working on hitting it solid? The fibre built is really forgiving. Maybe too much?
Leave a comment:
-
Actually, from what I understand of the Skytrak, the ball position may change relative to the laser dot. This means that the ball doesn't necessarily sit in one spot. Further, in real life, balls settle into the grass. Balls sitting on top of a mat don't really replicate course conditions.
Just tried hitting from the flat part of my Fiberbuilt mat - almost too easy as you can easily brush the ball off. Compared to hitting from the 'indent' above the tee holder, it's total child's play because the little bit that the ball sits 'down', really makes you have to hit a better strike. ProTee makes you do that every shot.
BTW use whatever mat you feel comfortable with. The rubber tee insert kinda matches up with real golf in that you use a regular tee.
Also - I believe someone posted that the SkyTrak doesn't coexist well with the Fiberbuilt mat and misreads increase. So the point is moot.Last edited by aja; 05-05-2016, 08:42 PM.
-
Keep us updated, I'm curious how you feel about the fiber built
-
Just curious for the using the fiberbuilt, where do you place your skytrak?
Leave a comment:
-
I did some extensive testing yesterday with my 5x5 cce vs hitting off of fairway grass at my local practice facility and I will say with the irons the cce definitely tends to punish more than what you would see in real life.
I may order a fiberbilt and if I like it will probably sell my one week old 5x5 cce mat for $250. I'm in the philly area if anyone is interested let me know.
Leave a comment:
-
With the Skytrak, you need to use the same spot to hit the ball with a drive, an approach, or a putt. I can understand that the rubber itself is actually under the mat, but that also means that there's a void above it that the ball can settle (however slightly) into. On my CCE mat, that divot is at least noticeable.
-
The rubber tee insert that is used on the Fiberbuilt mat is a better solution in my view. The rubber insert is below the mat's surface and doesn't interfere with the club.
You use a regular golf tee. I use plastic tees and the ones I've been lucky enough to find rarely break and last a long time.
The ProTee sensor uses the Fiberbuilt mat and rubber tee insert. Looks and feels like real golf.
-
-
I use the tomahawk attached to a claw so the tomahawk doesn't go flying all over the place. It works brilliantly.
Tee Claw Artificial Grass Mat Real Tee Holder & Alignment Training Aid (2 Pack) https://www.amazon.com/dp/B016AKN71W..._eTIkxbNJP3F4Q
Sent from my iPhone using Tapatalk
Leave a comment:

Leave a comment: