Mevo+ Unobstructed path?

[Noob20]

When FlightScope says it has to be unobstructed between the Mevo+ and the ball, how big a lane is that? If this is a basement set up, and there is furniture and kid's toys around the outside, and a TV mounted on the wall between the Mevo in the rear of the room, and the tee in the middle and the screen or net at the far end, how wide a runway do I need? Will 4' wide be enough? 6'? Trying to understand how much I need to "clean up" between using the Mevo and returning the room to the rightful owners (the kids).

Thanks for everyone's input.

[GungHoGolf]

Just imagine a conical beam from the Mevo+ to the screen and about 10' high and 12' wide, and keep that area clear of objects. Moving objects like fans should be further out of the cone, or covered with #20 wire mesh to shield them.

[Noob20]

Thanks, GungHo. So the width of the path is essentially 12 feet wide? Seems wider than I expected, but doable I think.

[GungHoGolf]

At the screen, it's probably 8-12' wide, yes. Of course at the unit it's about 6" wide. It's conical.

[unit91jj]

when you say #20 wire mesh, is it something like this?

https://www.homedepot.com/p/Fencer-Wire-2-ft-x-10-ft-20-Gauge-Poultry-Netting-with-1-in-Mesh-NB20-2X10M1/306601971

[Noob20]

So you can have a 4'-5' path from the unit to the ball, and then expand from there?

[GungHoGolf]

Yes that's plenty