Mevo+ IP address change?

[amclaugh]

Was trying to work out why E6 on my PC could never find my Mevo+ when connected to my network. FS golf on iOS always found it. E6 offline works fine.

Seems Flightscope coded the IP address of the Mevo+ to be 192.168.2.1. Which is fine except when that’s the same as my home network subnet! This explains why E6 can’t find it.

I can change my IP subnet but it’s a PITA because there’s a lot of devices and some don’t use DHCP.

Does anyone know If the IP address of the Mevo+ can be changed??

[PaulyB]

How about a DHCP reservation for the Mevo+ in your router.

[Milhaus5050]

Yes it can be changed very easily by contacting flightscope tech support. I had the same issue with my bell fibe internet and Flightscope was very aware of how to change it and mine has worked perfectly since. Flightscope will setup a remote session on your computer to do it.

[amclaugh]

Yes it can be changed very easily by contacting flightscope tech support. I had the same issue with my bell fibe internet and Flightscope was very aware of how to change it and mine has worked perfectly since. Flightscope will setup a remote session on your computer to do it.

thanks for this. just had the remote session with Flightscope support - all fixed in 10 mins. Brilliant!

[Targuy]

WHAT ? Flightscope accepts to change the network setup of the Mevo ?
in this case why don’t they deliver a very simple setup utility to let us use our own wifi hotspot and avoid all the network issues and having to buy cellular iPads ?

[SteveMac]

WHAT ? Flightscope accepts to change the network setup of the Mevo ?
in this case why don’t they deliver a very simple setup utility to let us use our own wifi hotspot and avoid all the network issues and having to buy cellular iPads ?

Hello, resurrecting this thread because I had the very same issue. My Mevo+ worked with everything EXCEPT TGC2019. It would show "connected" but would not register any shots in TGC2019. It was very frustrating.

I found that the 192.168.2.1 address on the Mevo Plus did conflict with my DHCP server on my WiFi, so I called Flightscope.

just got off the phone with FlightScope and the solution was very simple and everything you need is located in the FS Golf app on your iPad.

• Make sure nothing else is connected to the Mevo+
• Connect your iPad wifi to the Mevo+
• Open FS Golf
• Go to "Settings"
• Go to “Radar Settings”
• Go to the "Advanced Settings"
• Go to "Wifi Settings"
• Click on the IP 192.168.2.1 and change it to 192.168.3.1 (or some other non-conflicting IP)
• Save the changes
• Disconnect Mevo+ from the iPad
• Reboot Mevo+
• Go back to your laptop or PC where TGC2019 is installed.
• Connect your Mevo+ to wifi
• Relaunch the TGC-Flightscope Interface
• The old IP may still show up, if so, click the box where the IP is displayed, and there will be a drop down to select the new 192.68.3.1 IP or whatever you set it to.
• Relaunch TGC2019
• Select a course in gameplay and you should now be seeing the shots register on screen.

This worked for me on the Mevo+ while playing TGC2019 and alleviated a lot of frustration!

Hope this helps someone like me later who can avoid having to call Flightscope. I will say however, they were VERY helpful and solved the issue quickly.