GCQ TGC2019 New Interface GCQX2

[Kevin_C]

My GCQuad is up snd running on TGC2019. With Skytrak I used TGC settings file for Straight Putting, Club boosting etc... What do I use for GCQuad?

[mthunt]

My GCQuad is up snd running on TGC2019. With Skytrak I used TGC settings file for Straight Putting, Club boosting etc... What do I use for GCQuad?

What you can adjust you use the settings file.

[markrookiesim]

I need some help - I'm willing to pay for it too. I have a GC Quad that is connected via USB to my computer and have FSX2020 running but I want to get TGC2019 going instead/also. What are the step by step things I need to do in order to make sure it works. I have not bought TGC2019 yet so take that into account as well. I have no idea what I'm doing from a computer standpoint so any help would be greatly, appreciated.

[mthunt]

I need some help - I'm willing to pay for it too. I have a GC Quad that is connected via USB to my computer and have FSX2020 running but I want to get TGC2019 going instead/also. What are the step by step things I need to do in order to make sure it works. I have not bought TGC2019 yet so take that into account as well. I have no idea what I'm doing from a computer standpoint so any help would be greatly, appreciated.

Hello, first you buy TGC2019. When buying you select ProTee as your system. Anywhere it says GSX, you use GSXQ2 above. Ignore the bluetooth parts are you don't need it.

1. Install ProTee interface
2. Install GSXQ2
3. Install TGC2019

These are the instructions:
GC2 GSX & ProTee Inteface Setup for TGC and ProTee 2.0 - Golf Simulator Forum

[rbilramz]

Thank you for the update, I can confirm that it works perfectly with my computer connected to the internet via ethernet and the QCQuad connected via Wifi.

[markrookiesim]

Hello, first you buy TGC2019. When buying you select ProTee as your system. Anywhere it says GSX, you use GSXQ2 above. Ignore the bluetooth parts are you don't need it.

1. Install ProTee interface
2. Install GSXQ2
3. Install TGC2019

These are the instructions:
GC2 GSX & ProTee Inteface Setup for TGC and ProTee 2.0 - Golf Simulator Forum

Did everything and went to register the Pro Tee license and received this error: WTF?

[mthunt]

Did everything and went to register the Pro Tee license and received this error: WTF?

First try a reboot. If that fails uninstall and install again. That should fix it. If not open a ticket with ProTee. I haven't seen that one before.

[markrookiesim]

First try a reboot. If that fails uninstall and install again. That should fix it. If not open a ticket with ProTee. I haven't seen that one before.

So I got to work when I launched as admin. Played for five minutes shut it down thinking I can come back to it later. Started it all back up, and while everything launches it will not register shot data. Launch monitor is on, GQSX2 is running, don’t get it. This is way more of a hassle than it needs to be. Any advice?

[mthunt]

So I got to work when I launched as admin. Played for five minutes shut it down thinking I can come back to it later. Started it all back up, and while everything launches it will not register shot data. Launch monitor is on, GQSX2 is running, don’t get it. This is way more of a hassle than it needs to be. Any advice?

Once you got it down it takes seconds. You need to start the Quad then run ProTee interface then run GSXQ2. Makes sure both ProTee Interface is lit and gcq is connected then launch TGC. That’s the only way. It’s not as simple as FSX but it’s the only way.

[dawms]

For free software that enables TGC, I find the software to an amazing bargain and a huge factor in my enjoyment of the GCQ purchase. Yes, it isn't perfect, but it is software developed outside of both TGC and Foresight Sports so it a) can't be integrated, and b) might not be appreciated by certain companies. Relish the capabilities, varnish over the inconvenience.

[Scottygolf]

Gentlemen,

I received all my appropriate license keys, etc for TGC2019. I have my Quad but can't seem to get the PC to connect via bluetooth to the Quad? It see's the Quad but wont connect. I am using one of the Asus Bluetooth adapters.

I read one point someone said run ethernet to computer and go off of computer wifi. I do not have ethernet cable access to the PC.

ProTee interface I am using is the 3-17-b, Am I supposed to try and connect the Quad just like I had the GC2?

Appreciate the help (as usual).

Scottygolf.

[mthunt]

Gentlemen,

I received all my appropriate license keys, etc for TGC2019. I have my Quad but can't seem to get the PC to connect via bluetooth to the Quad? It see's the Quad but wont connect. I am using one of the Asus Bluetooth adapters.

I read one point someone said run ethernet to computer and go off of computer wifi. I do not have ethernet cable access to the PC.

ProTee interface I am using is the 3-17-b, Am I supposed to try and connect the Quad just like I had the GC2?

Appreciate the help (as usual).

Scottygolf.

Quad connects via wifi or usb. No Bluetooth.

[Scottygolf]

That was my question, did I still need to follow the GC2 instructions skipping the step of setting up the blue tooth. I will give it a go today. thanks

[mthunt]

Yes. Follow each step but connect with wifi which you said you did and use GSXQ2 instead of GSX. I’ve kept the instructions current on the forum and GSXQ2 comes with further quad instructions I included with it

[Scottygolf]

Well, that was easy. Slide the Data On, Click on the connect button and up and running. Now to play with the graphics to get those updated.

Thanks guys as usual!

[Migolfer]

Any chance this works for GC3??

[mthunt]

There’s a different one for GC3

[DaveStaffsUK]

Any chance this works for GC3??

Is the GC3 version available on here? I was trying to get a version off discord but the guy who’d created it said it wasn’t really finished yet so not installed it. Any pointers much appreciated.

[mthunt]

GC3 works with TGC. DM me

[jHo911]

Sent you a PM with the details.

[mthunt]

Didn’t get one.

[Scottygolf]

In the GSX GC2 version there are options to add spin and length for irons drivers etc. Does the version for the Quad offer the same type of settings?
Thanks!

[mthunt]

In the GSX GC2 version there are options to add spin and length for irons drivers etc. Does the version for the Quad offer the same type of settings?
Thanks!

GSXQ2 locks all settings. There is no adjustment.