Tweet
Sharing the results of 4 months of work, mostly DIY and putting things together from viewing examples online and having a finished product in my head to work from. My previous install was on the opposite end of the room. Netting and Impact screen hanging from curtain rails, blocking real use of the room from the hall side. I had quickly put it all together and used a simple CCE mat and Fiberbuilt flightdeck oval on top of the carpet. This was done purposely, allowing me to experience the setup and plan for a permanent install down the line. I used the initial setup for 6 months, then tore it all down to get build 2.0 started. I'm happy with the way it all turned out, just focusing some on the home theater audio side of the room. Main items used:
- Skytrak with JNPG
- Fiberbuilt 4 section hitting surface
- Synlawn putting surface (remnant) on 3/4" foam insulation board and 3/4" particle board to match hitting surface height. Synlawn fringe to trim out the area.
- Carl's Golf Standard impact screen / Spectrum Golf 144x108 Seamless Poly screen
- Mesh Tarp and cloth behind main screen for light blocking and window protection
- BenQ TH671ST at 8.5' from screen
- 150" diagonal spandex screen for movie viewing, movable and hangs in front of the impact screen.
- Various sections of commando cloth for surrounds
- 2" acoustic foam sections for overhead surround
- Home Theater speakers and subwoofer behind the main screen, custom 18" sub, various speakers 7.2 configuration
- Octane Contour HR Seating
- 4" PVC to Gutter couplers for putting cups, 4 1/4" diameter
Comment