Why level mat and turf to each other?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • GolferinPA5
    Junior Member
    • Nov 2024
    • 3

    #1

    Why level mat and turf to each other?

    About to start building a set up using Carl Enclosure. I bought basic turf from Home Depot (about 0.3 inches tall and will span the entire sim area more or less) and have a 5x7 Carl's Mat arriving in a week. Mat is 1.75" tall. I notice that many people level the turf so it is same height as mat. Is that strictly for aesthetic reasons?
  • gstprecision
    Junior Member
    • Jun 2024
    • 5

    #2
    It depends on the end result desired. I personally went with just a hitting strip (11"x20") and used gym floor tiles and cheap turf from home depot to level everything and recess the hitting strip in the middle of the mat. It also works better for putting.

    Comment

    • Ronsc1985
      Super Member
      • Feb 2015
      • 648

      #3
      If not level it's like hitting from a side hill lie.

      Comment

      • GolferinPA5
        Junior Member
        • Nov 2024
        • 3

        #4
        Originally posted by Ronsc1985 View Post
        If not level it's like hitting from a side hill lie.
        The mat is level. I'm referring to making the mat the same elevation as the hitting mat.

        Comment

        • Ronsc1985
          Super Member
          • Feb 2015
          • 648

          #5
          Originally posted by GolferinPA5 View Post

          The mat is level. I'm referring to making the mat the same elevation as the hitting mat.
          If the mat and the hitting strip are not at the same level then it's like hitting from a sidehill lie or changing the lie angle of your clubs. Either way it will affect the ball flight starting direction.

          Comment

          • BoxerGarage
            Junior Member
            • Feb 2022
            • 27

            #6
            A 5'x7' hitting mat can sit on top of your basic HD turf and it will be no problem at all. A recessed hitting mat or hitting strip is just aesthetics. NOTE: If you have a floor based LM you will need to make sure that the LM sits at the same height as your hitting mat.

            Comment

            • mjgolf123
              Member
              • Jan 2021
              • 44

              #7
              I would recommend that the hitting surface is at the same elevation as your feet. It's awkward if the hitting strip is higher than your feet and will affect your ball flight. Also, it's nicer to have everything at the same level otherwise you might trip or stub your toe if you aren't looking.

              Comment

              • mthunt
                Ultimate Member
                • Aug 2014
                • 4746

                #8
                Originally posted by GolferinPA5 View Post
                About to start building a set up using Carl Enclosure. I bought basic turf from Home Depot (about 0.3 inches tall and will span the entire sim area more or less) and have a 5x7 Carl's Mat arriving in a week. Mat is 1.75" tall. I notice that many people level the turf so it is same height as mat. Is that strictly for aesthetic reasons?
                It's nice all the same level for putting and looks.
                My Courses:
                World Par 3's by mthunt
                Toronto GC (L) mthunt
                Burlington G&CC by mthunt
                Weston G&CC by mthunt
                London Hunt Club L mthunt
                Park CC Lidar mthunt
                Sunningdale GC Robinson L
                Sunningdale GC Thompson L
                Muirfield Village (liDAR) First Ever Lidar course
                Country Club of Castle Pines (liDAR)
                The Sanctuary GC ProTee L
                The National GC L mthunt
                Mississaugua GC L mthunt
                Shaughnessy G&CC L mthunt
                Markland Woods CC mthunt
                Hidden Lake Old L mthunt
                Magna GC L mthunt
                Barrie CC L mthunt
                mthunt Range

                Comment

                Working...