Tweet
Hello Protee community. I'm having a problem with setting up my putting sensor. I purchased a used Protee sim and i'm putting the final touches on the install. Everything else is up and running and working correctly. When I plug in the putting sensor to the main sensor and check it in the interface I can get the putting sensor to read a putt, but it won't reset for the next putt. Unplug the sensor and redo, I get the same thing, no reset. I used search function and found it might be the lighting. Voila, right! That's what I thought. I had the flood over the main and the spot over the putting sensor. I switched the lights and still get the same result. Does anyone have any suggestions to try next. Remote login?
-
-
Never heard of that before. When it happens again, go into the sensors or debug screen and see what sensors were activated. And please install the latest 3.02f interface. -
I'm still trying to fix this putting sensor, so I thought I would ask again if anyone had any ideas on what to try next. I contacted Protee support and they believe that it has something to do with the cable or connectors. Protee sent me some new cables with connectors to replace what I have. I still get the same result with the new cables. The putting sensor will read the putt, and I get the red initial read in debug, but just no reset. The red lit sensors are an improvement from old cable. Unplug, reconnect get the same. The main sensor works perfect as far as I know. It will read shots and I can putt from it no problem.
Can any other cable or connector in the chain from the computer to the mat cause any such problem?
Is there anyone in Denver metro area that can help?
My last resort is to probably send main sensor and putting mat back to Protee to see if they can fix it.
Comment
Comment