Sensor Mat Issues

[GSF_Admin]

If you need to hit 45 degrees right to get a straight line, there is something wrong. Nothing todo with the H-cam. In the debug screen, you can see which sensors on the ball track are triggered with your shots. If sensor 12 comes up in red then you will get a straight line. Any other sensor in red on the row, will go left or right. There might be some debris or light issue.

http://csc.protee-united.com/entries...ng-the-sensors

http://csc.protee-united.com/entries...esults-are-off

[Maverick]

Good links GSF_Admin, especially the second one.

Well, there might more than 1 issue here. Main sensor is offset to the right. which is ok. Just keep in mind the ball in the game will always launch from the middle of the screen. Also, it's possible that your mind could be trying to swing towards the middle of the screen and combine that with your slightly over the top move could cause pulls to the left.

Hard to tell from the picture but is the sensor square with the target line? If it's slightly off, the readings for face and path will be off. First step is to get the sensors squared and make sure they don't move. Then install the H-cam and make sure it's working correctly. Might have to finish the floor in that area and have the putting sensor covered with your putting carpet. Make sure V-cam is working correctly.

If install was correct and shadows are well defined, the system should be close. Once that is all done, we can tweak club face and path, side spin, ball speed, etc, to get accurate ball flight.