GC2 GSX interface issue NOW FIXED

[SFR]

I think I found another issue. This may be related to the issue of some drives showing shorter in the Protee software than the GC2 readout shows. This is on the Tee Box and when practicing.

Here is what I found. When in practice mode on the tee box the first drive seems to be fine and then after that they seem off. When you change the club window and toggle through it to get back to the driver and then hit again it is fine. Once you go to hit the 2nd time the software seems not to use the GSX settings but rather default settings. This seems like it is on the tee only and once in the fairway in practice mode the irons seem ok without selecting again. However on the tee even a par 3 you need to re select the iron after the first hit or the 2nd practice hit will not use the GSX setting. Putting on the greens was fine with practice and you could hit one after the other without issue. I tried this on a diving range and on a course and both did the same thing so I don't think it

[SFR]

This does seem to be just related to practice when you hit more than one shot from the same tee box spot. And only on the tee box even if you drop one on the tee box. Again if other GC2 users with the GSX interface can try this and confirm. So far I have not seen this when playing a normal round.

[SFR]

Wow, thanks Protee, already fixed the issue. There is now another GSX version 5 with the fix.