SkyTrack - Full Metal Jacket protection shield

[awisnia]

Long...Long...Gone..

[Hannaford]

Finally had a chance to finish a prototype of my SkyTrak protection. (I had my last unit take a ball to the IR lens while IN the protective case from SkyTrak - it didn't work again.)

Being lucky enough to own a business with a good bit of sheet metal equipment, and finally the time. (having a party this weekend and need to protect my unit!) The leveling feet need a bit wider spacing, and I need to test that the unit still reads shots. I went with a minimum of openings to try to keep balls from sneaking through the front. I popped off the IR lens so that it's easy to see the parts that need to "see" - I'll obviously be putting it on before testing. Still unsure if I'll screw the unit to the base and leave an air gap, or use foam on 5 sides to isolate the SkyTrak from the steel.

I added a lip in the front so I can drop an alignment rod in for a visual reference.

Holes on bottom need adjustment, and maybe slotting to allow the SkyTrak to be adjusted to the base for alignment.

Interested in comments! [ATTACH=CONFIG]n90781[/ATTACH]
[ATTACH=CONFIG]n90782[/ATTACH]
[ATTACH=CONFIG]n90783[/ATTACH]
[ATTACH=CONFIG]n90784[/ATTACH]
[ATTACH=CONFIG]n90785[/ATTACH]
[ATTACH=CONFIG]n90786[/ATTACH]

I realize you have some older posts and an "official" FMJ case is available, but do you have any Skytrak cases that you have designed personally still available for sale? I ask since I am not satisfied with any cases containing prongs in the window of the case.

[awisnia]

worry not, sir.

[loll_l]

We just shipped our 527th (and last) case and wanted to thank everyone that participated over the last six-months. it's been and incredible father-son adventure with my 12-year-old and an absolutely invaluable learning experience for him. However, it's time to get back to running my business (pbasics.com) and leave the fight-monitor case sales to the experts at SkyTrak.

SkyTrack has recently launched their own case and it looks great. It's beefy at close to an 1/8 inch of steel and it's been thoroughly tested with the benefit of actually knowing the workings of the Skytrak's cameras, trigger, flash and wifi systems. You can see the LEDs from everywhere, the usb connection is protected, and there's a handle which also catches stray rebounds.

In short - it's "official" and backed by SkyTrak.






More information is here on the SkyTrak website.

Sorry to bring up an old post but I haven't been on this forum for a while and I'm just catching up....

Wasn't FMJ (Full Metal Jacket) your name for the product? Surely you're getting some kind of royalties from SkyTrak for using both your name and your design?

[awisnia]

Indeed doublebogey - always appreciate your peer review (and debate)!!

[awisnia]

Cheers, Mr. Bond.

[doublebogey]

awisnia , what an experience it must have been for your son - R&D, production, marketing, sales & distribution and then at last selling out to a big corporate type.

[wbond]

This was quite a thread and great piece of equipment. Thanks for doing this, it really brought about protecting our expensive little box.

[awisnia]

We just shipped our 527th (and last) case and wanted to thank everyone that participated over the last six-months. it's been and incredible father-son adventure with my 12-year-old and an absolutely invaluable learning experience for him. However, it's time to get back to running my business (pbasics.com) and leave the fight-monitor case sales to the experts at SkyTrak.

SkyTrack has recently launched their own case and it looks great. It's beefy at close to an 1/8 inch of steel and it's been thoroughly tested with the benefit of actually knowing the workings of the Skytrak's cameras, trigger, flash and wifi systems. You can see the LEDs from everywhere, the usb connection is protected, and there's a handle which also catches stray rebounds.

In short - it's "official" and backed by SkyTrak.






More information is here on the SkyTrak website.

[awisnia]

Our is much lighter weight steel and doesn't have the handle.

[awisnia]

Just use it without the legs and set it on the mat - works fine. (see photo a few posts above)

Nothing to see on the back - it's wide open. ST screws to the base.

[Whiskeyjack]

HI awisnia, I have a question about your units. My mat area is the same height where the hitting area is and where the ST is set up.
If I use your unit it will the ST not be too high? It doesn't look as if I can lower it enough to be level with the hitting area have there been any issues with this?
Also is there a picture of the back of the unit?

[awisnia]

Stantallman thanks so much - really appreciated!

[Piccinmv]

what is the difference between the FMJ case sold on ebay and the one that is now available on skytrak's website which also has the FMJ initials on it?

[Stantallman]

I ordered an FMJ case and received it yesterday. I made an account on here simply to say thanks and comment about how impressed I am. It looks awesome and I haven't had any issues at all. It definitely puts my mind at ease when I'm swinging. I'm glad I didn't buy the plastic one and found this one instead. Great job and thanks so much for your work on this!