Starting the build finally

[Lefty71]

The house will be done the middle of February and we just started laying out the raised floor for the Protee.


Should be done in a week or so, will post as we go along.

[bongta029]

Where was the screen from? And what size is your enclosure? Carl's told me that they dont sell 14'enclosure kit due to risk of bending, but they will sell customized 14' if I'm aware of the risk. I want to ask how yours is holding up. Thanks.

[Lefty71]

I made the cage for the carls screen 14 x 9

[bongta029]

I see. Did you have to put a supporting pole in the middle of the cage for being 14' or was it just a standard cubic cage? Carl's place had an image for diy cage longer than 12' that has a center supporting pole in the cubic cage.

[Lefty71]

no center support seems to be doing well, allsports had the superbay 14 x 9 I looked at that and built from that.

[jerry scheidt]

you're build looks awesome congrats

[jcacavias]

Lefty71 How did you secure the 2x4's to the floor? Tapcons? Construction adhesive?

[Lefty71]

adhesive to attach

[gene438]

Outstanding work Lefty, very professional looking....looks like it will be first class sim room....congrats.

[gene438]

Are you going to put in some putting holes? How many?

[gene438]

Here are the cups I used

https://www.amazon.com/KINGTOP-Practice-Putting-Green-Training/dp/B071WHDGBN/ref=sr_1_7?keywords=putting+cups&qid=1550673633&s=gateway&sr=8-7

[gene438]

And the drill bit

https://www.amazon.com/ITM-AT680414-Carbide-Hole-Pack/dp/B01C0M0S0W/ref=sr_1_24?keywords=4+1%2F4+hole+drill+bit&qid=1550673701&s=gateway&sr=8-24

[Tbraden32]

Any updates?

[Lefty71]

[gene438]

Looking really good Lefty.....nice job.

[Lefty71]

Thank you and for all of your help I really appreciate it. It seems like especially on the driver that I know I have the ball starting out right with a little fade but on the Protee it seems to start out left?? Any clue why?

[gene438]

First, when you hit that drive, are you hitting dead center on the screen or to right/left? Next, I would hit a shot, and look at your hcam and your streak....is it matching up with what Protee is reading? Is the system reading your swing plane (in/out or out/in) correctly? The answer lies in the answer to those questions.....

[LeftyLeff52]

What did you use for the putting area? Looking good brother.

[Lefty71]

Synlawn putting green for the whole surface