GC2 GSX & ProTee Inteface Setup for TGC and ProTee 2.0

[kalcormier]

Do you have the protee interface open as well?

[wbond]

See post 3 and 6, maybe that's the issue.

[wbond]

I think in the settings file tab where you see the status of connected, you have to select use The Golf Club or something along those lines

[CBDBOZ]

Can anyone tell me how I know on TGC if it is connected to my GC2.....

I have tested GC2 and works fine with FSX on Bluetooth

I also now have Connected status on GSX on both Status input and Status Output.

But in TGC - I have tried hitting a ball, it registers on GC2 but nothing happens on TGC...not sure if connected and how I can test??

[CBDBOZ]

Making progress!!

in FSX, when going into Settings (top right 3 lines), then Devices, I tried Filter....and lo and behold the Bluetooth circle was NOT checked in Connection type.
After Checking....FSX was able to find the GC2 via Bluetooth

...I then went back to GSX, and when sliding Connect Toggle in Status screen...finally it now says Connected on Status Input & Status Output.

Now need to test this out tomorrow and will report back if both FSX and TGC now work for me.....


..Today is a better day

[CBDBOZ]

Can’t seem to add a picture, but found the Bluetooth settings under “Related Settings” / “More Bluetooth options”

Under COM Ports tab

COM3 Outgoing Foresight_GC2 xxxxx
COM4 Incoming Foresight_GC2 xxxxx

[mthunt]

I

Anyone out there that can help....
...
I have a gaming laptop with inbuilt Bluetooth - that is able to pair to GC2. according to my device settings.

I cant see GC2 as an available device in FSX (I can only see when connected via USB Cable)

for TGC - I have tried following the steps for GSX and pro Tee interface. ultimately I get GSX Status Input - disconnected, and Status output - Connected (tried using com 3 and com 4 as options, and with 127.0.0.1 in ip address for Connect to)...can never get both input and output as connected.



others have advised to buy the asus BTdevice ( I have ordered and will try but cant see how this will help as my Bluetooth on laptop seems good for all other connections when using BT)...but will try …


Getting so frustrated Now, and hoping someone out there has the answers....

It means your Bluetooth settings are wrong. Post the picture of your settings or call ProTee for help.

[CBDBOZ]

Anyone out there that can help....
...
I have a gaming laptop with inbuilt Bluetooth - that is able to pair to GC2. according to my device settings.

I cant see GC2 as an available device in FSX (I can only see when connected via USB Cable)

for TGC - I have tried following the steps for GSX and pro Tee interface. ultimately I get GSX Status Input - disconnected, and Status output - Connected (tried using com 3 and com 4 as options, and with 127.0.0.1 in ip address for Connect to)...can never get both input and output as connected.



others have advised to buy the asus BTdevice ( I have ordered and will try but cant see how this will help as my Bluetooth on laptop seems good for all other connections when using BT)...but will try …


Getting so frustrated Now, and hoping someone out there has the answers....

[rbg88]

Hello, I can't get my GC2 Connected to Bluetooth for more than a second or 2 once on my computer it then goes back to paired and it wont stay "Connected".
I am trying to look into this as much as I can myself however running out of options. I went into the Foresight devices through BlueTooth and found BTHENUMBER - \Dev_1000E8C4BFE8\7&15bceec5&0&BluetoothDevice_100 0E8C4BFE8 requires further installation.

Since it says it requires further installation is that why it wont stay connected for more than a second? I am running out of options so anything helps!

Thanks!

[rbg88]

Hello, I have just sent you an email, thank you so much for some reason I can't open your picture big enough to see what the settings are that you have but I have put a lot in my email that should give you the detail of what I have done.

Thanks!