SkyTrack - Full Metal Jacket protection shield

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Dan Frost
    Member
    • Jan 2017
    • 32

    #121
    I finally got my SkyTrak in the mail yesterday and got to test out the FMJ. I had purchased a FMJ from the V1 batch with the screw alignment issue before I had my SkyTrak unit. I ended up using earthquake putty to secure it to the case to the ST rather than drilling out the bottom hole. It made it very easy to align the gaps on both sides and the front and I thought it might still provide some shock absorption.

    Anyway, I must have been excited for the SkyTrak because I got the shanks for my first session. Good news is that even on my worst shank I still didn't hit the unit. I had one really bad shank that didn't read. I tried again later in the evening and my swing came back, all distances felt right, didn't notice any misreads. Hit probably 100 balls in the driving range and the GIP and from everything I could tell the FMJ had no impact to the reads. Seems like a great investment and I'm just a little more comfortable now than I would be otherwise.

    Comment

    • awisnia
      Senior Member
      • Jan 2016
      • 236

      #122
      Originally posted by Sledge0001 View Post
      I played an entire 18 today with the beta version alligned perfectly and velcroed into place and had no odd readings and 1 missed high lofted flop shot with a wedge. I would say that the unit when centered and with the Skytrak up close to the case seemed to work perfectly.
      Sledge0001 thanks for the feedback - was that in TGC? I've heard a few questions via the listing site if it "works with TGC". So far all I've heard is that it does, but I wanted to get more data points. From my limited understanding of the software hand-offs, I've always assumed that the SkyTrak software took the images pushed from the unit and then determined ball parameters (speed, azimuth, spin, launch angle, axis) and then passed those numbers to the TGC interface (or used the same data for its own range, challenge, or improvement ball flight creation)

      In other words, one application may trace a different ball flight, but the underlying starting data is the same for both.

      So, if the SkyTrak is "working" in the case for its own range app - it will work for TGC by definition...does that seem right??
      Last edited by awisnia; 01-12-2017, 09:11 PM.

      Comment


      • Sledge0001
        Sledge0001 commented
        Editing a comment
        Yes hat was in TGC. I have had issues with high lofted flop shots prior to using the FMJ. My feeling is the shot would have been missed as well with the plastic protective case.

      • awisnia
        awisnia commented
        Editing a comment
        Sledge0001 how was the putting? Working fine for me.

      • Sledge0001
        Sledge0001 commented
        Editing a comment
        No issues putting at all.
    • Brandon
      Senior Member
      • Oct 2016
      • 144

      #123
      I'm very pleased with my fmj. I ended up enlarging one hole so it's secured now. Certainly no more misreads than without the fmj. I used 1/16" self adhesive rubber cabinet door bumpers to space the Skytrak off the face, worked great and adds a little shock absorption

      Comment

      • Doug Doty
        Member
        • Aug 2015
        • 34

        #124
        Remember I am still grounded from my skytrak !! until I receive the FMJ, please keep us up to date on how the new batch is coming along.
        Just jumped on board with a SkyTrak August 2015 for my birthday present to myself.

        Comment

        • awisnia
          Senior Member
          • Jan 2016
          • 236

          #125
          Shipped everything Wednesday (updated v4)..now shipping same day from stock.

          Sent from my SM-G935V using Tapatalk
          Last edited by awisnia; 01-13-2017, 02:08 PM.

          Comment

          • Doug Doty
            Member
            • Aug 2015
            • 34

            #126
            Super excellent, and thanks for the update.
            Just jumped on board with a SkyTrak August 2015 for my birthday present to myself.

            Comment

            • Jwheels9876
              Champion Member
              • Jul 2016
              • 1286

              #127
              Anyone have any putting issues on TGC? I haven't modified my case yet but I didn't bolt it down either, just pushed it against FMJ and my putts kept going 3 degrees one way or the other randomly making me miss badly... Has anyone modified and had the issue go away? I ended up taking the skytrak out of the case the last few holes just to make sure it wasn't the machine and it seemed fine that way with no weird readings...

              Comment


              • Jwheels9876
                Jwheels9876 commented
                Editing a comment
                Just an update on the putting issues I was having, I had time yesterday to drill the holes out on the bottom of my beta case to fit properly and proceeded to play around 25 holes and didn't have one put roll unexpectedly at all.
            • Jasonstanley
              Senior Member
              • Jun 2016
              • 122

              #128
              Received my skytrak condom,(beta version) from the uk, really impressed with the build and finish, tried 100 shots, no misreads. Boom.

              Comment

              • Audioclyde
                Junior Member
                • Dec 2016
                • 12

                #129
                I received my FMJ yesterday; spent around 2 hours with it on my Skytrak and very few misreads.

                Thanks for getting these out to us to us so quickly!

                Randy

                Comment

                • Gobluemason
                  Member
                  • Dec 2016
                  • 30

                  #130
                  Well guys, I had my first unintentional test of the FMJ last night. My slightly intoxicated buddy toed a hybrid so badly it struck my SkyTrak right in the belly. As you might expect the FMJ said "F YOU" to the ball as it bounced off harmlessly. SkyTrak still working perfectly!

                  I'm interested to see a direct hit to the lens area, but I'm not willing to go out of my way to test it!


                  Sent from my iPhone using Tapatalk

                  Comment


                  • Ken Robie
                    Ken Robie commented
                    Editing a comment
                    Keep feeding beers to your buddy and you might find out!!! ;>)
                • waltertyler
                  Junior Member
                  • Nov 2016
                  • 6

                  #131
                  Just got my fmj yesterday. Super solid build. Screw holes bolted in aligns fine. Not much misreads. Love the alignment stick holder. Very happy with the purchase. Now what to do with the older plastic case.

                  Comment


                  • Greasegun
                    Greasegun commented
                    Editing a comment
                    Sell it on ebay for 95 bucks
                • colinjm18
                  Advanced Member
                  • Dec 2015
                  • 283

                  #132
                  Just ordered mine

                  Comment

                  • TorchRedRob
                    Advanced Member
                    • Nov 2014
                    • 337

                    #133
                    Originally posted by Jwheels9876 View Post
                    Anyone have any putting issues on TGC? I haven't modified my case yet but I didn't bolt it down either, just pushed it against FMJ and my putts kept going 3 degrees one way or the other randomly making me miss badly... Has anyone modified and had the issue go away? I ended up taking the skytrak out of the case the last few holes just to make sure it wasn't the machine and it seemed fine that way with no weird readings...
                    try cutting the two "jail bars" out of the flash area. apparently that is what was modified on the other forum-member-designed case to prevent misreads.

                    Comment

                    • awisnia
                      Senior Member
                      • Jan 2016
                      • 236

                      #134
                      Originally posted by TorchRedRob

                      try cutting the two "jail bars" out of the flash area. apparently that is what was modified on the other forum-member-designed case to prevent misreads.
                      They protect the lens and cause no issues.

                      Sent from my SM-G935V using Tapatalk

                      Comment

                      • LambyPro
                        Junior Member
                        • Jan 2016
                        • 22

                        #135
                        Really looking forward to receiving my FMJ case.The SkyTrak case is fragile in my opinion. I'm a PGA Pro in the U.K, Coaching on the ST Sim has been a nervy experience. The shank is a common shot with amateur golfers, but the shot that really makes the ST unit vulnerable is the toe shank.The ST units close proximity to the strike area adds an extra pressure to handicap golfers. I would love to be able to position the ST unit another 30cm's back from the strike area. For those Basement parties,beware also of the golfer with the recoil follow through!!
                        A strike bag provides good protection from the carefree swing.....Lamby

                        Comment

                        Working...