Net return golf mat

[Goose06]

I have searched and searched and have not found a review of this mat. It seems ideal for using with the net return net, but is it any good as a hitting mat? Does it bounce your club into the ball? Is it durable? When using it as a putting green does it roll close to a real putting green? Any feedback would be appreciated.

[DirtyGarry24]

I bought that mat. I won't dog it, it's good for what is. I have seen no difference in distances from it to the CCE mat that I now hit off of. I quickly realized though that it isn't sustainable for hard long term use. I play everyday so that is relative. Turning and using 4 corners with a Skytrak isn't sustainable either.

So, I incorporated a 10" x 30" CCE strip into my Net Return mat and it's a dream. This takes some work though. True 1-1/8" thk plywood with a cutout matches up perfectly with the height. At $35 a strip, the CCE is a great solution. I'll try to get a pic up tomorrow.

[BadEddieKit]

I own it as well and wouldnt recommend using it as a hitting mat. Its thin and think it would likely cause injuries. Spend a few hundred on a good hitting mat. CCE, Divotaction, or fiberbuilt are all popular choices, or just add an insert as Gary suggests. I use my net return mat to fill out my room floor.

[Goose06]

I bought that mat. I won't dog it, it's good for what is. I have seen no difference in distances from it to the CCE mat that I now hit off of. I quickly realized though that it isn't sustainable for hard long term use. I play everyday so that is relative. Turning and using 4 corners with a Skytrak isn't sustainable either.

So, I incorporated a 10" x 30" CCE strip into my Net Return mat and it's a dream. This takes some work though. True 1-1/8" thk plywood with a cutout matches up perfectly with the height. At $35 a strip, the CCE is a great solution. I'll try to get a pic up tomorrow.

Is the cce 1-1/8" thicker or thinner? I'm assuming thicker. I think plywood comes in 4x8 sheets so a 6x10 mat doesn't exactly work out in a simple manner, not to mention the challenge of moving the mat out of the way when not in use. Curious to get your thoughts on these potential problems.

[DirtyGarry24]

Yes, the CCE is approx. 1.125" thicker than the Net Return mat. You will need to make 3 sections if you want to use all of your Net Return mat. I can't remember exactly but I believe my hitting section is 6' x 40". This makes a great stance mat with CCE strip set in. It's very heavy if you can imagine, but still moveable. Actually more moveable than that 6 x 10 Net Return mat. I haven't made my 2nd and 3rd sections yet as I haven't really missed them. I glued a 1/4" backing to my plywood to create a landing for the CCE strip. The CCE strip is not glued down as the cutout is very snug. If/when my strip gets worn then I can replace it.

I wanted to add that the CCE as a stance mat wouldn't be very good in my opinion. It's very mushy. The thin Net Return is great as a stance mat.

[DirtyGarry24]

I've uploaded some pics. I apologize if they are not good, it seems uploading pics to this forum changes daily.

[penrose]

It is OK for putting but cannot use it to hit off of. Like others have said get a better one.