TGC/Protee - GSX Settings and Bluetooth adapter

[HWoods]

Just looking at the original post with suggested GSX settings with the GC2. They need to be updated since the last few updates. The above will be too long now.
To leave leave irons and wedges all at default 0 for me will still have the Protee distance come up short by a few yards compared to the GC2 read out. Setting it to 3 or 4 is about even or slightly more (a yard or two).
The Driver is still needed to be boosted to 7 - 10. The putting forgivness needs to be at 2 now to use the rounded off to 0 when ball path is less than 1.5 deg.

I am finding it ok to just have all irons for your club options and then on the tee it will just select your longest iron (which if irons and wedges are set all the same it won't matter) and then just hit any club you want. I find hitting woods come out as matching the GC2 readout better this way. Others need to test.

Yeah looks pretty close to what I have. I have all 0s except for driver which is 7.

[zip]

I'm using a 4Cirago Bluetooth 4.0 adapter. Model # BTA8000 (with Extended Range).

I have it hooked up in my sim room using a 15ft active USB extension cable. PC is outside the sim room.

Crap, I spazzed and ordered a regular USB. I think I only need 10 ft, so hopefully won't matter that it's not active.

I also bought a BT adapter on Monoprice. If it doesn't work I'll buy the one you suggest.

As I said, I'm a spaz.

[JV17]

Thanks SFR... I was going to ask if anything had changed dramatically over the last year.

[Maverick]

Just looking at the original post with suggested GSX settings with the GC2. They need to be updated since the last few updates. The above will be too long now.
To leave leave irons and wedges all at default 0 for me will still have the Protee distance come up short by a few yards compared to the GC2 read out. Setting it to 3 or 4 is about even or slightly more (a yard or two).
The Driver is still needed to be boosted to 7 - 10. The putting forgivness needs to be at 2 now to use the rounded off to 0 when ball path is less than 1.5 deg.

I am finding it ok to just have all irons for your club options and then on the tee it will just select your longest iron (which if irons and wedges are set all the same it won't matter) and then just hit any club you want. I find hitting woods come out as matching the GC2 readout better this way. Others need to test.

Thanks SFR. I will update the post.

[Maverick]

Which one is best? The Asus USB-BT400 Bluetooth 4.0 ?

And a simple USB cable can extend the range from my PC in to my bay?

I'm using a 4Cirago Bluetooth 4.0 adapter. Model # BTA8000 (with Extended Range).

I have it hooked up in my sim room using a 15ft active USB extension cable. PC is outside the sim room.

[SFR]

Just looking at the original post with suggested GSX settings with the GC2. They need to be updated since the last few updates. The above will be too long now.
To leave leave irons and wedges all at default 0 for me will still have the Protee distance come up short by a few yards compared to the GC2 read out. Setting it to 3 or 4 is about even or slightly more (a yard or two).
The Driver is still needed to be boosted to 7 - 10. The putting forgivness needs to be at 2 now to use the rounded off to 0 when ball path is less than 1.5 deg.

I am finding it ok to just have all irons for your club options and then on the tee it will just select your longest iron (which if irons and wedges are set all the same it won't matter) and then just hit any club you want. I find hitting woods come out as matching the GC2 readout better this way. Others need to test.

[JV17]

Just don't look at it. When I stopped checking the bluetooth status the thing was just connected. It seems like opening the bluetooth settings makes windows do dumb things. Have you tried a different USB port on the computer? What brand is it?

Mm, it's funny you say that. It says it's connected but then when I look in the Bluetooth tray nothing is there, and I've been wondering if it is still connected anyway. I have tried all 7 USB ports! It's a Panda. I'm going to try my iPhone again and see if that stays connected according to the phone.

[zip]

I went through 3 adapters before I found the best one. Keep us posted.

Which one is best? The Asus USB-BT400 Bluetooth 4.0 ?

And a simple USB cable can extend the range from my PC in to my bay?

[mmlincon]

Just don't look at it. When I stopped checking the bluetooth status the thing was just connected. It seems like opening the bluetooth settings makes windows do dumb things. Have you tried a different USB port on the computer? What brand is it?

[JV17]

I'll be sure to post whatever solution I end up with Zmax.

[JV17]

I installed the driver from the manufacturer of my bluetooth device -Targus in this case. It's been working good once I did that. There were a lot of bluetooth issues with win8.1 but new drivers should work fine.

Thanks MM. I started with the company's driver. I'm actually wondering if I should uninstall that and see what the windows drivers do.

[mmlincon]

I installed the driver from the manufacturer of my bluetooth device -Targus in this case. It's been working good once I did that. There were a lot of bluetooth issues with win8.1 but new drivers should work fine.

[Maverick]

I went through 3 adapters before I found the best one. Keep us posted.

[JV17]

mm and SFR got it to work fine on Windows 8.1. Did you try my suggestions above?

Hey Zmax, I know distance or line of sight weren't the issue as I had everything right on to of the computer while trying to connect. I think i need to try another brand, but I'd like to try something that someone has found successful so I can avoid aimlessly purchasing and testing multiple adapters until I find what works. I'll PM those guys to see what they're using. Thanks!!!

[Maverick]

mm and SFR got it to work fine on Windows 8.1. Did you try my suggestions above?