protee ball track 2 sensor?
Collapse
X
-
-
inorkuo What high lofted wedge shot problem are you experiencing and what settings have you changed to try and fix it?
Comment
-
my 60 degree lob wedge pitch will sometimes fly too far. it only happens 30 to 40% of the time so i haven't spent much time on it. i was using the recommended settings for pitching and chipping below but i also ran across a post from bnorman58 saying that he contacted protee about the same thing in february of this year and they recommended chipping_ballspeed_factor=65 and pitching_ballspeed_factor=75 so now i'm using 65 and 75. i'm also going to try increasing the pitching distance to 51M (56 yards) and see if that helps.
Chipping_use_clubspeed=True
Pitching_use_clubspeed=True
Chipping_distance= 32M (35 yards)
Chipping_ballspeed_factor=50
Chipping_drag_factor=100
Chipping_minimum_launch_angle= 1
Pitching_distance=41M (45 yards)
Pitching_ballspeed_factor=85
Pitching_drag_factor=100
Pitching_minimum_launch_angle= 1
-
Thanks for posting your info.
I made some changes too recently based on one of Bnorman58's posts and that helped quite a bit. But I think it was to do with using PT1 for the horizontal camera method for wedges. I was getting mis-reads on the wedges horizontal shot direction because my clubhead was getting picked up by the HCam.
I too have the odd wedge that sails way too far. Usually it is a half swing that goes 150 yds.
I'll have a look at my settings compared to yours.
-
Comment