protee ball track 2 sensor?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • inorkuo
    Advanced Member
    • Sep 2015
    • 344

    #1

    protee ball track 2 sensor?



    anyone ever see this before? is this something new protee is working on? seems like a good solution to the high lofted wedge shot problem.
  • Richard_Askren
    Senior Member
    • Aug 2014
    • 182

    #2
    Interesting. Hopefully they post some news on this.

    Comment

    • Bubba22
      Sim Guru
      • Aug 2014
      • 2992

      #3
      That is the older ProTee sensor mat. Nothing new. Not available anymore. It went when Martin went.

      Comment

      • aja
        Super Member
        • Aug 2014
        • 689

        #4
        inorkuo What high lofted wedge shot problem are you experiencing and what settings have you changed to try and fix it?

        Comment


        • inorkuo
          inorkuo commented
          Editing a comment
          my 60 degree lob wedge pitch will sometimes fly too far. it only happens 30 to 40% of the time so i haven't spent much time on it. i was using the recommended settings for pitching and chipping below but i also ran across a post from bnorman58 saying that he contacted protee about the same thing in february of this year and they recommended chipping_ballspeed_factor=65 and pitching_ballspeed_factor=75 so now i'm using 65 and 75. i'm also going to try increasing the pitching distance to 51M (56 yards) and see if that helps.

          Chipping_use_clubspeed=True
          Pitching_use_clubspeed=True

          Chipping_distance= 32M (35 yards)
          Chipping_ballspeed_factor=50
          Chipping_drag_factor=100
          Chipping_minimum_launch_angle= 1

          Pitching_distance=41M (45 yards)
          Pitching_ballspeed_factor=85
          Pitching_drag_factor=100
          Pitching_minimum_launch_angle= 1

        • aja
          aja commented
          Editing a comment
          Thanks for posting your info.

          I made some changes too recently based on one of Bnorman58's posts and that helped quite a bit. But I think it was to do with using PT1 for the horizontal camera method for wedges. I was getting mis-reads on the wedges horizontal shot direction because my clubhead was getting picked up by the HCam.

          I too have the odd wedge that sails way too far. Usually it is a half swing that goes 150 yds.

          I'll have a look at my settings compared to yours.
      Working...