Tweet
Updated 12/26/14
Latest beta interface:
Remember to always install new interface by right click, then Run as Administrator.
Latest interface available from ProTee Customer Support Center:
http://symftp.net/download/PTPInstaller3.03d3.exe
Fix for chip and pitch shots that go too far. Please make the following changes:
Chipping_distance= 32M (35 yards)
Chipping_minimum_launch_angle=1
Chipping_use_clubspeed=True
Pitching_minimum_launch_angle=1
Pitching_use_clubspeed=True
Pitching_distance=41M (45 yards)
TGC enable/disable option added. Enable TGC for connecting to TGC Simulator software. Disable TGC for connecting to ProTee Golf.
IMPORTANT! As soon as you Enable or Disable TGC use, you must save, close, and restart the interface. Penalty and drag settings can now be saved separately for TGC and ProTee Golf. Before using this interface for the first time, please set all ball speed and drag to default. Then tweak as needed.
New features: Improved driver ball speed, Improved side spin, improved carry distances. Incorporated most of Zmax's settings(except for camera settings). Check here for my latest recommended settings: http://golfsimulatorforum.com/forum/...rface-settings
Please set ball speed, drag, lift, and side spin to default before first use, then tweak as needed. Should only need minor tweaks if any.
IMPORTANT! Make sure both the Portal and the game are not running when applying updates.
And install them by "Run as Administrator".
Installing the latest interface:
Before installing, make a copy of your current settings file and put it on the desktop.
EXIT the current interface if it's running.
After download, right click the file and select "Run as Administrator", click OK and finish install.
Start the interface, set all club and ball speed to default.
Set all drag and lift to default.
Set all side spin to default.
Set Playmode = 0 or Professional
Set "ball speed increase factor"(interface settings screen) to 1.2 if using Almostgolf balls. Go higher if you need to.
Exit the interface, then see my recommended settings section below.
The system should be very accurate for most people with all settings at default, but feel free to adjustments if needed.
Latest Red Chain software update:symftp.net/download/QuickUpdate41.exe
This should be the last update to the game until we get scramble modes. This update includes these previous updates:
symftp.net/download/QuickUpdate40c.exe
symftp.net/download/QuickUpdate37.exe
symftp.net/download/QuickUpdate38b.exe
Then download and run the latest DirectX update.
www.microsoft.com/en-us/download/details.aspx?id=35
Warning: Use beta software at your own risk. These are for experienced users only! The latest proven interface can be found here:csc.protee-united.com/home
Latest beta interface:
Remember to always install new interface by right click, then Run as Administrator.
Latest interface available from ProTee Customer Support Center:
http://symftp.net/download/PTPInstaller3.03d3.exe
Fix for chip and pitch shots that go too far. Please make the following changes:
Chipping_distance= 32M (35 yards)
Chipping_minimum_launch_angle=1
Chipping_use_clubspeed=True
Pitching_minimum_launch_angle=1
Pitching_use_clubspeed=True
Pitching_distance=41M (45 yards)
TGC enable/disable option added. Enable TGC for connecting to TGC Simulator software. Disable TGC for connecting to ProTee Golf.
IMPORTANT! As soon as you Enable or Disable TGC use, you must save, close, and restart the interface. Penalty and drag settings can now be saved separately for TGC and ProTee Golf. Before using this interface for the first time, please set all ball speed and drag to default. Then tweak as needed.
New features: Improved driver ball speed, Improved side spin, improved carry distances. Incorporated most of Zmax's settings(except for camera settings). Check here for my latest recommended settings: http://golfsimulatorforum.com/forum/...rface-settings
Please set ball speed, drag, lift, and side spin to default before first use, then tweak as needed. Should only need minor tweaks if any.
IMPORTANT! Make sure both the Portal and the game are not running when applying updates.
And install them by "Run as Administrator".
Installing the latest interface:
Before installing, make a copy of your current settings file and put it on the desktop.
EXIT the current interface if it's running.
After download, right click the file and select "Run as Administrator", click OK and finish install.
Start the interface, set all club and ball speed to default.
Set all drag and lift to default.
Set all side spin to default.
Set Playmode = 0 or Professional
Set "ball speed increase factor"(interface settings screen) to 1.2 if using Almostgolf balls. Go higher if you need to.
Exit the interface, then see my recommended settings section below.
The system should be very accurate for most people with all settings at default, but feel free to adjustments if needed.
Latest Red Chain software update:symftp.net/download/QuickUpdate41.exe
This should be the last update to the game until we get scramble modes. This update includes these previous updates:
symftp.net/download/QuickUpdate40c.exe
symftp.net/download/QuickUpdate37.exe
symftp.net/download/QuickUpdate38b.exe
Then download and run the latest DirectX update.
www.microsoft.com/en-us/download/details.aspx?id=35
Warning: Use beta software at your own risk. These are for experienced users only! The latest proven interface can be found here:csc.protee-united.com/home
Comment