ProTee 101 plus setup tips for newbies.

[Archv6625]

Well - there were a few things going on. I wasn't using the scrollbar on the bottom - which is one of the reasons I was having trouble making the images look like zmax's. Also, changing the send to 15 made it much happier. Its picking up the launch correctly now.

There are other problems, but from a conversation with ZMax, they will be more appropriately fixed once the install is permanent. I'm sure there will be another round of questions then - thanks!

[Bubba22]

No problem. Keep us posted.

[Cklguy2013]

I have a question regarding the orientation of the sensor mat; is there some way to tweak it in the interface? I believe mine is off by 2 to 3 degrees and I would like to correct it. For example when hitting a gap wedge from 110 yards I might get 3 outside in with a 3 degrees closed club face (a shot with no side spin), with the ball missing the target by feet only, whereas a trig calculator would tell me that a 3 degree miss from 110 yards should be off target by 5 to 6 yards. Also, let me add that these shots are starting right down my line, both from visual inspection and H-Cam readings. I could reorient my mat, which would be a MAJOR pain, but I was hoping there was some tweak/fix in the interface. Thank you in advance for your help.

[Maverick]

Yes, try adding -2 or -3 to your current club face and path correction settings. For example, my driver path is currently set at -1. Add -3 to that would = -4. And my driver face is currently set at 2. Add -3 to that would = -1.

Club_path_correction_Driver=-1
Club_path_correction_Wood=-2
Club_path_correction_Iron=-3
Club_path_correction_Wedge=-2
Club_face_correction_Driver=2
Club_face_correction_Wood=3
Club_face_correction_Iron=3
Club_face_correction_Wedge=4

[Bubba22]

Why is your mat off? I would suggest realigning it. I assume your Hcam is off as well? As Z says you can adjust the club path and club face readings but make sure you adjust your Hcam to give you the right ball path horizontal azumuth.

[Cklguy2013]

Thanks Zmax. And Bubba it is off because I never properly aligned the mat in the first place, unfortunately it is now in a mat complex so very difficult to adjust, very difficult. The h-cam is good though in that I used a laser to align, so bottom line the sensor mat needs to be rotated 2 to 3 degrees counter-clockwise to correct it. Zmax's adjustments were exactly what I was looking for in that they will let me adjust the base line settings without having to move the mat.

[Bubba22]

Cool. Should work then.

[Cklguy2013]

Actually all my face and path setting were set to 0 in the interface so taking Zmax's advice, I've changed all to -2, so hopefully that will yield better face and path readings more in tune with what is happening.

[Cklguy2013]

H cam is messed up. Suggestions anyone?

[Cklguy2013]

ham cam issues gives reading way left

[Maverick]

Remoted in and problem solved. Settings got messed up.

[Cklguy2013]

I'm curious about the "use V-Cam for spin button". How does this work? Will it eliminate the need to switch clubs?

[Maverick]

It's beta. Not ready. For testing only. But yes, that's the idea. And more accurate spin.

[Cklguy2013]

I'm not sure if this is a Protee orTGC issue, but I hit this shot off the toe on purpose and it read as only missing the sweet spot by .2 inches, I believe it should have been more like 1.5 inches, and shouldn't it also read off to the right?

[Cklguy2013]

Here is one hit off the outside of the hosel. I'm a right handed player btw.