Sent you pm.
Please check.
I want to buy mega flash.
Please check.
I want to buy mega flash.
-
-
Payment sent! Thanks for the awesome deal man!Comment
-
Is there a performance gain to be had with the Megaflash over the standard non superflash module?Comment
-
It has a brighter flash than the standard one. When the standard one gets older, you may start to get more missed shots because light output gradually drops off and the cameras donβt get a clear picture of the ball. It is hard to say if it makes the readings more accurate just because you would need some secondary gold standard system measuring simultaneously to say for sure, but having more light should help image quality. The main performance benefit is just that you wonβt have to get a new flash for a very long time
-
-
Andy
In June you commented
The tubes that you are using from here https://www.xenonflashtubes.com/flas...ulator_85.html are more delicate than the ones that I use in my flash. They get pushed close to their limit which shortens their life, and if you get oils from your fingers on them that can cause them to crack prematurely as well. The oils cause certain spots of the glass to heat up faster than others, and the mismatch in expansion can cause it to break. The reason my flashes can last much longer is the bulb is run at a much lower percentage of its max capacity. It will eventually fail from the bulb getting cloudy and the light levels dropping off rather than cracking.
I need to repair my older flash as it will take too long for Foresight to install a new flash board (told me today it will be at least 4 weeks). I can't get the xenonflashtubes site to work which suggests they may be out of business or don't service the UK???
Do you know of another solution that is comprable to the XFTR-1015-2300 Flash Lamp Miniature Assembly?
Thanks
Comment
-
rdanh It looks like their website works for me in the US. It says worldwide shipping as well, so I'm not sure why it wouldn't work for you. I will also send you a PM
https://www.xenonflashtubes.com/flas...ulator_85.htmlComment
-
Hey Andy, I have tried to send you a couple of PM's today but I believe your mailbox is full. Could you please PM me about purchasing both a MegaFlash and a protective cover?Comment
-
hey andy im interested in a megaflash. you have any in stock? still follow payment instructions from original post?Comment
-
Yep I have them ready to go. PayPal $150 goods and services or $145 friends and family to gc2flash@gmail.com. Let me know your shipping address in the PayPal notes!
-
-
do you also sell those nice metal shank tanks and are they compatible with HMT?
Comment
-
Yes, I still have enclosures available. Here is the post with details about it. It is compatible with the HMT as well. https://golfsimulatorforum.com/forum...815#post301815
-
-
Payment sent for a flash, mine just died the day I finally got an HMT. No backup
Comment
-
Hi, looking for advice before ordering one of these, I have just purchased a second hand gc2 with serial number in the 4400s. The machine will struggle to read short chips and putting, putting is really bad. Then another time will read many in a row no problem. Last night for example I brought my unit inside to test on the carpet, it literally read 40 little chips and putts in a row no problem. I had a 2 minute break and did the same again, and it only read 5. Constantly showing the horizontal lines. Does this indicate that the flash module needs changing?
ThanksComment
-
It could be a number of things. Some putters and chrome wedges can cause reflections that interfere with readings and will give dashes. So if you have a spare putter and can try an iron for the chipping that would help rule that out. I have had mine get in a weird state where it will just start missing putts and I need to hit a harder shot like a 20 yard pitch to get it out of that state. Iβm guessing you donβt have a full setup since you just bought it, but maybe you could hang a blanket or stack up some pillows to hit a pitch into and see if that gets it working again. Also make sure the front foot is down, the GC2 is fully open, and you donβt have white shoes or shoes with reflective material (like some running shoes have). When you are putting and chipping you stand closer to the ball so shoes can become an issue. If none of that works, then the flash would be the next thing I would try. You may need a power board upgrade with your serial number to be compatible with my flash
-
-
Just purchased a GC2 with a serial number 108xx, would this be compatible with your flash unit Andy? ThanksComment
-
I would just like to put my thanks across on here to Andy for the excellent all round service.
I bought a used gc2 around 3 weeks ago, from the off I've been having problems with it when playing simulator golf, it would hardly ever read short chip shots and putts. Came across this thread when doing some reassarch, got in touch with Andy and a week later I received a mega flash and an upgraded board which Andy helped me identify is what was needed for my gc2 to go with the mega flash.
I installed yesterday as soon as they arrived, 4 of us then played for 7.5 hours straight and we didn't have one no read and it worked perfectly, I was beginning to think I'd been sold a dodgy gc2.
can't thanks Andy enough for the all round service.. If we continue to play 7.5 hour sessions then I may be in touch with Andy again quicker than most π€£π€£
β³οΈβ³οΈβ³οΈππ»ππ»ππ»Comment
-
Payment sent. Thank you Andy!Comment
-
Payment sent! Now I'll have a matching megaflash to go with my shank tank from Andy.
Comment
-
just sent payment.. please provide confirmation and delivery status when possible. thanks!Comment
Comment